ASN Wikibase Occurrence # 142048
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 24 January 2012 |
Time: | 15:52 |
Type: | Nemesis Air Racing/Jon Sharp Nemesis NXT |
Owner/operator: | Private |
Registration: | F-WNXT |
MSN: | 10 |
Year of manufacture: | 2010 |
Total airframe hrs: | 75 hours |
Engine model: | SMA SR305-230 |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | South of Camarillo Airport - KCMA, CA -
United States of America
|
Phase: | Approach |
Nature: | Test |
Departure airport: | Camarillo, CA (CMA) |
Destination airport: | Camarillo, CA (CMA) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:After a series of performance tests at cruise altitude, the engine of the experimental amateur-built airplane began to vibrate and lose partial power. Unable to maintain altitude, the pilot initiated a return to the departure airport. During the landing approach, he was unable to extend the landing gear with either the primary or backup systems. He attempted to perform a go-around; however, the airplane would not climb and he instead performed a forced landing into an adjacent field. The airplane sustained substantial damage to the lower fuselage and both wings during the accident sequence, precluding a determination of the failure mode of the primary landing gear extension system. While the pilot reported that the backup system did not operate because he failed to positively disconnect a circuit breaker required for the system's operation, the failure of the primary landing system was not evident until late in the accident sequence and a go-around was not feasible.
Examination of the engine revealed that the high pressure fuel injection lines had been in contact with airframe components, contrary to recommendations in the manufacturer's maintenance manual. This contact increased the stress on one of the lines, causing fatigue cracks to develop, which ultimately led to its failure and loss of fuel flow into one of the engine cylinders.
Probable Cause: A partial loss of engine power during cruise flight due to incorrectly installed airframe components, which came into contact with a high pressure fuel line and resulted in its failure. Contributing to the accident was an undetermined failure of the primary landing gear extension system that could not be identified due to extensive damage.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | WPR12LA081 |
Status: | Investigation completed |
Duration: | 2 years |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
25-Jan-2012 04:56 |
RobertMB |
Added |
25-Jan-2012 05:32 |
Alpine Flight |
Updated [Aircraft type, Departure airport, Destination airport] |
25-Jan-2012 06:01 |
RobertMB |
Updated [Aircraft type, Departure airport, Destination airport, Narrative] |
03-Feb-2012 17:55 |
Geno |
Updated [Time, Operator, Nature, Source, Narrative] |
21-Dec-2016 19:26 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
27-Nov-2017 17:53 |
ASN Update Bot |
Updated [Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation