ASN Wikibase Occurrence # 145638
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 14 May 2012 |
Time: | 13:30 |
Type: | Piper PA-24-250 Comanche |
Owner/operator: | Private |
Registration: | N7171P |
MSN: | 24-2339 |
Year of manufacture: | 1961 |
Total airframe hrs: | 5222 hours |
Engine model: | Lycoming O-540 SERIES |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Near Shawnee Regional Airport - KSNL, Shawnee, OK -
United States of America
|
Phase: | Approach |
Nature: | Ferry/positioning |
Departure airport: | Oklahoma City, OK (KHSD) |
Destination airport: | Shawnee, OK (KSNL) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot was conducting the second leg of the airplane’s first flight after a recent engine overhaul. On final approach, the pilot lowered the landing gear handle; however, he did not receive confirmation that the landing gear was down. The pilot stated that he applied a lot of force to conduct the manual gear override but that he was not able to get the handle up. Shortly thereafter, the engine lost power. The airplane was substantially damaged during the subsequent forced landing. A postaccident examination of the airplane revealed that the mixture cable was bent, the cable was pulled from its last clamp prior to the carburetor mixture control, and the mixture control was pulled into the cutoff position. The routing of the mixture cable did not match assembly drawings, and several clamps used to route the mixture cable were missing. A grease fitting on the over-center link for the nose landing gear was in line with the bend in the mixture cable. Most likely, the landing gear center link became entangled in the mixture control cable, which prevented the nose landing gear from extending. The mixture likely came to idle when the pilot used extra force to try to extend the landing gear. The mixture cable was not installed properly during the recent engine overhaul.
Probable Cause: The improper installation of the mixture cable by maintenance personnel, which allowed the mixture cable to entangle with the landing gear during gear extension and led to the subsequent loss of engine power.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN12LA299 |
Status: | Investigation completed |
Duration: | 2 months |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
15-May-2012 09:19 |
Geno |
Added |
16-May-2012 17:13 |
Geno |
Updated [Time, Departure airport, Source] |
21-Dec-2016 19:28 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
27-Nov-2017 20:40 |
ASN Update Bot |
Updated [Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation