Accident Bell 407 N108MF,
ASN logo
ASN Wikibase Occurrence # 149860
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Tuesday 9 October 2012
Time:20:00
Type:Silhouette image of generic B407 model; specific model in this crash may look slightly different    
Bell 407
Owner/operator:Acs Helicopters Llc
Registration: N108MF
MSN: 53783
Year of manufacture:2007
Total airframe hrs:837 hours
Engine model:Rolls-Royce 250-C47B
Fatalities:Fatalities: 2 / Occupants: 3
Aircraft damage: Destroyed
Category:Accident
Location:Coolbaugh Township, PA -   United States of America
Phase: En route
Nature:Executive
Departure airport:Elmira Regional Airport, NY (ELM/KELM)
Destination airport:White Plains-Westchester County Airport, NY (HPN/KHPN)
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The surviving passenger reported that, after taking off, the weather “began to get worse,” and the helicopter pilot advised the passengers that they would not be able to make it to their destination airport. The weather worsened, and the pilot decided to divert. When the surviving passenger looked out of the window, it was “misty and dusky.” Shortly after, the helicopter struck trees and terrain. A witness reported observing the helicopter flying “very low” along the southbound lane of an interstate with all of its lights on just before the accident. He stated that the visibility was low, that the helicopter was under “low fog,” and that it was like “pea soup” around the area.
Review of meteorological and GPS information indicated that dark night instrument meteorological conditions (IMC) existed in the accident area. Light rain was present, and low instrument flight rules conditions existed with vertical visibility of 200 feet and variable visibility of 1/2 mile. Before the accident, the helicopter was flying through this area of weather at a low altitude and an airspeed of about 30 knots. Although the pilot could have returned to the departure airport or landed in a suitable area along his route of flight, he chose to enter IMC despite the availability of safer options and was then forced to divert as the weather worsened. Also, once the helicopter had entered the weather, the sun had already set and minimal ground lighting was present in the heavily wooded area surrounding the interstate. Therefore, it is unlikely that a discernable horizon was present, which would have significantly increased the pilot’s workload because it would have required him to reference the helicopter’s flight instruments to maintain the helicopter’s attitude, flightpath, energy state, and altitude.
Fuel was found onboard the helicopter, and no evidence of any preimpact failure or malfunction of the helicopter, drivetrain, or engine was found that would have precluded normal operation. Review of data recorded by the engine control unit revealed no hard faults or engine operational issues before the beginning of the accident sequence. Recorded data further indicated that the engine was running during the impact sequence and continued to operate for an additional 21 minutes following the accident while the helicopter was resting on its right side, which resulted in reduced oil flow and lubrication to the engine and the eventual postimpact failure of the turbine main line bearings and rotatable parts.
Although the pilot held an airline transport pilot certificate that allowed him to fly under IMC in airplanes, he did not possess an instrument helicopter rating. Review of information provided by the helicopter manufacturer revealed no evidence that the pilot had received any inadvertent IMC or instrument flight rules helicopter training when he was at its training center. Examination of the pilot’s flight- and duty-time records also revealed that he was scheduled to fly a round trip for the airline he worked for the day after the accident occurred, which likely resulted in self-imposed pressure to complete the trip he was flying on the day of the accident so that he could return home and make his report time for his assigned trip on the following day.

Probable Cause: The pilot’s decision to continue visual flight rules flight into instrument meteorological conditions due to self-imposed pressure to complete the trip, which resulted in impact with trees and terrain.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: ERA13FA014
Status: Investigation completed
Duration: 1 year and 9 months
Download report: Final report

Sources:

NTSB

Location

Revision history:

Date/timeContributorUpdates
10-Oct-2012 02:53 gerard57 Added
10-Oct-2012 04:37 rotorspot Updated [Aircraft type, Registration, Cn]
03-Mar-2013 10:01 TB Updated [Time, Operator, Location, Departure airport, Destination airport, Source, Narrative]
21-Dec-2016 19:28 ASN Update Bot Updated [Time, Damage, Category, Investigating agency]
28-Nov-2017 13:44 ASN Update Bot Updated [Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org