ASN Wikibase Occurrence # 152681
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 6 February 2012 |
Time: | 15:34 LT |
Type: | Guimbal Cabri G2 |
Owner/operator: | Northern Helicopters AB |
Registration: | SE-JNE |
MSN: | 1013 |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Location: | Gällstad, 15km s Ulricehamn -
Sweden
|
Phase: | En route |
Nature: | Training |
Departure airport: | JKG - ESGJ |
Destination airport: | JKG - ESGJ |
Investigating agency: | SHK |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:Navigation flight, pilot in traning. A loud bang was heard with severe vibrations. The pilot carried out an emergency landing (auto rotation), success.
The accident was caused by:
-The deep groove ball bearing in the engine pulley failed. The underlying cause was that it is delicate to inspect with certainty whether grease has penetrated into the bearing when applying lubrication.
Recommendation:
EASA is recommended to ensure that Hélicoptères Guimbal amends the procedure for the lubrication of bearings with part number HG61-0790 so that at inspections it is possible with certainty to determine that a sufficient quantity of grease has been injected into the ball bearing and at the correct position.
(RL 2013: 01 R1).
Accident investigation:
|
| |
Investigating agency: | SHK |
Report number: | L-12/12 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
http://www.havkom.se/virtupload/reports/RL%202013_01e.pdf Images:
Part of SHK RL 2013:01
Revision history:
Date/time | Contributor | Updates |
22-Jan-2013 14:33 |
Masen63 |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation