ASN Wikibase Occurrence # 165453
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 11 April 2014 |
Time: | 18:00 |
Type: | Cessna U206G Stationair |
Owner/operator: | Laser Mapping Specialists Inc |
Registration: | N156SA |
MSN: | U20605670 |
Year of manufacture: | 1980 |
Total airframe hrs: | 3370 hours |
Engine model: | Continental IO-520 Series |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Trevilians, Virginia -
United States of America
|
Phase: | Landing |
Nature: | Unknown |
Departure airport: | Louisa, VA (LKU) |
Destination airport: | Louisa, VA (LKU) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that, during the flight before the accident flight, he noted that the oil pressure was slowly fluctuating, so he chose to change the engine oil and filter. Airport personnel provided the supplies and observed the pilot perform the maintenance. The pilot removed and then opened the oil filter and “an excessive amount of metal” was observed. The pilot’s mechanic had replaced four cylinders about 4 months earlier, and the pilot assumed that the metal was chrome from the overhauled cylinders and was the result of “break-in.” Although airport personnel expressed concerns about the metallic debris, the pilot chose to finish the oil change and continue with his next flight. About 30 minutes after departure, the engine made “a strange sound,” and it lost power about 20 seconds later. The pilot conducted a forced landing, and the airplane landed hard in an open field, which resulted in structural damage to the airframe.
Disassembly and examination of the engine revealed that the engine cylinder through bolts on the Nos. 1 through 5 cylinders were significantly undertorqued. The crankshaft was fractured near the No. 2 main bearing. The areas adjacent to the No. 2 bearing on the inside of the engine case exhibited rotational scoring, indicating that bearing movement had occurred before the crankshaft failure. The Nos. 1 and 3 main bearings also exhibited evidence that bearing movement had occurred before the engine failure. It is likely that the mechanic did not properly torque the through bolts when he replaced the four cylinders, which allowed the bearings to move and led to the eventual failure of the crankshaft.
Probable Cause: The pilot's decision to continue operation of the airplane with known mechanical issues (fluctuating oil pressure and metal in the oil filter), which was the result of undertorqued cylinder through bolts. Contributing to the accident was the mechanic's failure to properly torque the engine through bolts, which led to the eventual failure of the crankshaft.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | ERA14LA193 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB
https://flightaware.com/live/flight/N156SA FAA register:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=156SA Location
Revision history:
Date/time | Contributor | Updates |
13-Apr-2014 23:35 |
Geno |
Added |
14-Apr-2014 23:14 |
Geno |
Updated [Registration, Cn, Operator, Departure airport, Source, Damage, Narrative] |
22-Apr-2014 23:51 |
Geno |
Updated [Nature, Source] |
21-Dec-2016 19:28 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
29-Nov-2017 14:02 |
ASN Update Bot |
Updated [Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation