ASN Wikibase Occurrence # 177918
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Monday 31 May 2004 |
| Time: | 12:15 |
| Type: |  Ayres S2R-T Turbo Thrush |
| Owner/operator: | Private |
| Registration: | N5686X |
| MSN: | 2359R |
| Engine model: | Garrett 331-1 |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Beaver, UT -
 United States of America
|
| Phase: | Landing |
| Nature: | Agricultural |
| Departure airport: | Beaver, UT (U52) |
| Beaver, UT (U52) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
According to the pilot, he had finished spraying a field and was returning to the airport for another load. He said that he had half a tank of fuel remaining and the engine was producing "excellent power." A few moments later, the engine ran rough for about a second and then stopped. He did not notice anything coming out of the exhaust. The pilot tried twice to restart the engine but was unsuccessful and he attempted a forced landing to an open field. During the landing, the airplane impacted terrain and struck a fence. Both wings were displaced aft and the right main landing gear was collapsed. A visual examination of the engine revealed a 360 degree crack around the P3 air pressure tube, causing a separation of the tube between the engine plenum and fuel control unit. The crack was approximately one-quarter inch aft of the "B" nut, which connects the P3 air pressure tube to the fuel control unit. There was a "notable" amount of carbon build-up in the area around the crack. According to a maintenance representative, failure of the tube in flight would have resulted in a "significant reduction in fuel scheduling which could result in an engine flameout." An attempt to restart the engine in flight would "likely have failed," however; an attempt would have accounted for the "notable" amount of carbon build-up around the break in the tube. No other aircraft anomalies were noted.
Probable Cause: the in-flight failure of the engine's P3 tube which resulted in the loss of engine power and the subsequent impact with terrain during a forced landing. Contributing factors include the lack of suitable terrain for a forced landing and the fence.
Accident investigation:
 |
|
Sources:
NTSB: https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20040615X00792&key=1
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 18-Jul-2015 16:31 | Noro | Added |
| 21-Dec-2016 19:30 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 07-Dec-2017 17:58 | ASN Update Bot | Updated [Cn, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation