ASN Wikibase Occurrence # 178669
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Wednesday 16 June 2004 |
| Time: | 12:00 |
| Type: |  Hatz CB-1 |
| Owner/operator: | Private |
| Registration: | NX26WF |
| MSN: | CB-1-222 |
| Engine model: | Lycoming O-290-D |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Nampa Municipal Airport, Nampa, Idaho -
 United States of America
|
| Phase: | Landing |
| Nature: | Private |
| Departure airport: | Nampa, ID (S67) |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot came to the airport to regain takeoff and landing proficiency in the subject aircraft since he had not flown it for a "considerable period of time." After taking off from runway 29, he continued around the VFR pattern, and established the aircraft on a final approach for a three-point landing on the same runway. As he crossed the runway threshold at about 65 mph, he added a little power and started moving the control stick aft. The aircraft's nose then moved upwards, partially blocking the pilot's view of the runway, so he looked along the left side of the cowling in an attempt to keep the runway in sight. Although he expected the aircraft to slow rather quickly, it did not do so, and continued to float at a height of about five feet above the ground. The aircraft then suddenly dropped hard onto the runway and bounced back into the air. During this sequence, the pilot "lost visual orientation with the direction the plane was headed," so he added full power in an attempt to execute a go-around, but the aircraft dropped onto the runway a second time. According to the pilot, he then moved the stick to the "full back" position, but the aircraft did not lift off again, and instead exited the side of the runway where its left main gear impacted a mound of earth. At that point, the left main gear separated from the aircraft, which continued on for about another thirty yards before the right main gear collapsed, which resulted in significant damage to the wings and fuselage. After the accident, the pilot noticed that a slight tailwind was blowing. There was no evidence of any anomaly in the flight control or breaking system of the aircraft.
Probable Cause: The pilot's failure to maintain directional control of the tail wheel aircraft during an aborted landing. Factors include a slight tailwind, and a mound (berm) of earth in the area where the aircraft departed the side of the runway.
Accident investigation:
 |
|
Sources:
NTSB: https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20040803X01141&key=1
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 15-Aug-2015 12:29 | Noro | Added |
| 21-Dec-2016 19:30 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 07-Dec-2017 18:05 | ASN Update Bot | Updated [Other fatalities, Departure airport, Destination airport, Source, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation