ASN Wikibase Occurrence # 188766
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 18 July 2016 |
Time: | 12:30 |
Type: | Stinson 108-2 Voyager |
Owner/operator: | Private |
Registration: | N343C |
MSN: | 108-3343 |
Year of manufacture: | 1947 |
Total airframe hrs: | 3305 hours |
Engine model: | Lycoming O-435 |
Fatalities: | Fatalities: 0 / Occupants: 4 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Haines Airport (PAHN), Haines, AK -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Skagway, AK (SKG) |
Destination airport: | Haines, AK (HNS) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The private pilot stated that, during the landing roll in the tailwheel-equipped airplane, he started a right turn to exit the runway using a high-speed taxiway when the airplane had slowed to about 20 mph. During the exit, the airplane made an abrupt right turn that the pilot could not control with left rudder and brake. The left wheel axle fractured, followed by a collapse of the left landing gear leg, which resulted in substantial damage to the airplane. The reported wind was a left quartering tailwind of 4 knots. The pilot and passenger observed variable gusting wind immediately after the accident. Postaccident examination after recovery of the wreckage found that the tailwheel attachment bracket was fractured.
An examination of the left main landing gear axle weld fracture with a scanning electron microscope (SEM) revealed features consistent with tensile overstress that would have occurred during the accident sequence.
An examination of the airframe tailwheel mount fracture surface with a SEM revealed signatures consistent with overstress failure, and other fracture areas of widespread corrosion.
Photographs taken before the airplane was removed from the runway showed the tailwheel assembly in its normal position, with no abnormalities visible. Also, during the recovery of the airplane, no tailwheel separation or abnormal function was observed. Based on the examinations of the fractured components, there is no evidence that the fracture of the tailwheel mount led to a displacement of the tailwheel assembly or a loss of control during the landing.
Based upon the pilot and passenger’s statements regarding wind at the accident site, it is possible that an unexpected gust of quartering tailwind initiated a loss of control, and the high groundspeed and heavy landing weight contributed to increased lateral loads on the left landing gear during the ground loop, which resulted in overload failures of the axle and tail bracket welds.
Probable Cause: The pilot’s failure to maintain directional control of the airplane during the landing roll with a quartering tailwind, which resulted in a ground loop and overstress failure of the left main landing gear wheel axle.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | ANC16LA048 |
Status: | Investigation completed |
Duration: | 2 years and 2 months |
Download report: | Final report |
|
Sources:
NTSB
FAA register:
http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=N343C Location
Images:
Photo: Alaska State Troopers
Revision history:
Date/time | Contributor | Updates |
20-Jul-2016 05:12 |
Geno |
Added |
16-Sep-2018 18:14 |
ASN Update Bot |
Updated [Time, Operator, Nature, Departure airport, Destination airport, Source, Damage, Narrative, Accident report, ] |
16-Sep-2018 18:40 |
harro |
Updated [Source, Narrative, Photo] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation