ASN Wikibase Occurrence # 21552
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Monday 30 June 2008 |
| Time: | 16:58 |
| Type: |  Cessna TR182 Turbo Skylane |
| Owner/operator: | Wings of the Cascades |
| Registration: | N7XZ |
| MSN: | R18201053 |
| Total airframe hrs: | 3793 hours |
| Engine model: | Lycoming O-540-L3C5D |
| Fatalities: | Fatalities: 0 / Occupants: 2 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | near Bend, OR -
 United States of America
|
| Phase: | En route |
| Nature: | Survey |
| Departure airport: | Redmond, OR (RDM) |
| Prineville, OR | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot reported that, during cruise flight, the engine began to run rough as she noticed that the propeller rpm was beyond the red line indication and that oil was coming from the forward cowling area behind the propeller. The oil began coating the windscreen and made forward visibility nearly impossible as the pilot initiated an off-airport landing in an adjacent open field. During the landing roll, the airplane struck a barbed wire fence and came to rest on a two-lane highway, which resulted in substantial damage to the right wing and engine firewall. A postaccident examination of the engine revealed that the crankshaft was cracked about 380 to 400 degrees around the circumference of the forward bearing journal, originating from the oil-through hole and progressing in a direction opposite of the rotation of the crankshaft. A metallurgical examination of the fracture region revealed that the origin of the fracture was consistent with a brittle intergranular fracture through the nitride layer and exhibited numerous crack arrest marks. Beyond the fatigue fracture area, the fracture was on a slant plane consistent with overstress separation. The source of the loading that lead to the initial crack formation at the oil through-hole could not be determined. Review of aircraft logbook records revealed that an engine overhaul was completed on May 1, 2006. The most recent annual inspection of the engine and airframe was conducted on May 30, 2008, 252.3 hours since the engine's last major overhaul.
Probable Cause: The failure of the crankshaft during cruise flight due to fatigue.
Accident investigation:
 |
|
Sources:
NTSB
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 05-Jul-2008 11:46 | Fusko | Added |
| 21-Dec-2016 19:14 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 21-Dec-2016 19:16 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 21-Dec-2016 19:20 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 03-Dec-2017 11:18 | ASN Update Bot | Updated [Operator, Total occupants, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation