ASN Wikibase Occurrence # 236723
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Thursday 4 June 2020 |
Time: | 12:19 LT |
Type: | Piper PA-28R-201T Turbo Arrow III |
Owner/operator: | Private |
Registration: | N533K |
MSN: | 28R-7703201 |
Year of manufacture: | 1977 |
Total airframe hrs: | 2431 hours |
Engine model: | Continental TSIO-360-F |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Corpus Christi International Airport (KCRP/CRP), TX -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Boerne, TX (5C1) |
Destination airport: | Corpus Christi International Airport, TX (CRP/KCRP) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The commercial pilot reported that during a visual approach for landing at the destination airport, the landing gear position indicator did not indicate that the landing gear was down and locked after it was selected down. The pilot reported he requested a fly by the air traffic control tower, which confirmed the landing gear was extended and cleared the airplane to land. During landing rollout, the landing gear collapsed, and the airplane impacted the runway surface resulting in structural damage to the external longerons on the bottom of the fuselage. During recovery of the airplane, it was noted the landing gear circuit breaker was popped. The circuit breaker was reset, the master switch selected on, and the landing gear was lowered using the landing gear handle. A postaccident functional test of the landing gear using the normal and emergency extension procedures revealed the landing gear extended without incident. The pilot further reported that after maintenance personnel removed the cockpit multifunction displays, he found a piece of screw/nut on the contacts of the landing gear control handle behind the instrument panel, which most-likely created a short-circuit and caused the landing gear circuit breaker to pop. The pilot did not use the airplane's emergency landing gear extension procedure to extend the landing gear during the accident flight.
Probable Cause: The pilot's failure to utilze the emergency landing gear extension procedure after a short-circuit within the normal landing gear system, which resulted in a landing gear collapse during landing.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN20CA212 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB CEN20CA212
Location
Revision history:
Date/time | Contributor | Updates |
06-Jun-2020 09:28 |
Captain Adam |
Added |
26-Mar-2021 10:28 |
ASN Update Bot |
Updated [Time, Other fatalities, Departure airport, Destination airport, Source, Narrative, Category, Accident report] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation