ASN Wikibase Occurrence # 285112
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Wednesday 28 March 2007 |
Time: | 18:45 LT |
Type: | Alon A-2 Aircoupe |
Owner/operator: | |
Registration: | N992DC |
MSN: | A-210 |
Total airframe hrs: | 1237 hours |
Engine model: | Continental C90-16F |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Ravenna, Ohio -
United States of America
|
Phase: | Unknown |
Nature: | Private |
Departure airport: | Youngstown Airport, OH (YNG/KYNG) |
Destination airport: | Akron/Canton-Fulton International Airport, OH (AKC/KAKR) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that the fuel tanks were filled at the departure airport. His accident report, in part, stated, "Engine quit - tried to restart engine but failed - Passenger who is an airline pilot with more experience asked for permission to assume [pilot in command], which I consented. We radioed [approach control] of our dilemma and for a heading to the nearest airport ... - we landed 1 mile short of [the closest airport] in a field where we hit a ditch, impacting hard, spun around and came to an abrupt stop." An examination of the wreckage revealed no pre-impact anomalies. The carburetor heat was found in the off position. Weather about 51 minutes prior to the accident was: Wind 050 degrees at 12 knots; visibility 10 statute miles; sky condition clear; temperature 14 degrees C; dew point 1 degree C; altimeter 30.27 inches of mercury. Weather about 9 minutes after the accident was: Wind 040 degrees at 8 knots; visibility 10 statute miles; sky condition clear; temperature 12 degrees C; dew point -1 degree C; altimeter 30.30 inches of mercury. The local temperature and dew point at the time of the accident were plotted on a Transport Canada carburetor-icing chart. Their intersection fell in the serious icing-descent power area. Neither the pilot nor the pilot rated passenger's written accident reports listed the use of carburetor heat. The pilot was asked in a telephone interview about it and he reported that carburetor heat was used during the forced landing.
Probable Cause: The pilot's failure to use carburetor heat in cruise flight. Carburetor icing conditions and a ditch were factors.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CHI07LA096 |
Status: | Investigation completed |
Duration: | 11 months |
Download report: | Final report |
|
Sources:
NTSB CHI07LA096
Revision history:
Date/time | Contributor | Updates |
01-Oct-2022 17:55 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation