Gear-up landing Accident Progresive Aerodyne SeaRey N204PB,
ASN logo
ASN Wikibase Occurrence # 285669
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Thursday 21 August 2008
Time:11:50 LT
Type:Silhouette image of generic SREY model; specific model in this crash may look slightly different    
Progresive Aerodyne SeaRey
Owner/operator:Private
Registration: N204PB
MSN: 211
Engine model:Rotax 912
Fatalities:Fatalities: 0 / Occupants: 1
Aircraft damage: Substantial
Category:Accident
Location:Sunapee, New Hampshire -   United States of America
Phase: Landing
Nature:Private
Departure airport:Newport, NH (2B3)
Destination airport:Sunapee, NH
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The non-certificated pilot departed a hard-surfaced runway for a flight to, and landing on, a lake approximately 10 miles away. According to the pilot, about 10 minutes into the flight he cycled the landing gear to the retracted position. He then observed that the wing flap position differed from that displayed on the cockpit indicator. While on the downwind leg of the traffic pattern for landing, he deployed the flaps to an estimated position of 10 degrees, and on the base leg, he attempted to position them to the landing setting of 20 degrees. When the airplane touched down on the lake, it stopped abruptly, and partially submerged. The impact resulted in a serious injury to the pilot, and substantial damage to the airplane. According to the pilot, he did not realize that the landing gear was extended for the water landing, and he did not select or command the extended position. Postaccident information provided by a Federal Aviation Administration inspector revealed that the landing gear was in the extended and locked position, and the landing gear controls were in the corresponding position. According to the designer of the airplane, two separate controls must both be activated to extend or retract the landing gear; no single action can cause the landing gear to extend, and the gear cannot free-fall to the extended and locked position.

Probable Cause: The pilot's failure to ensure that the landing gear was retracted for the water landing.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: NYC08CA285
Status: Investigation completed
Duration: 5 months
Download report: Final report

Sources:

NTSB NYC08CA285

Location

Revision history:

Date/timeContributorUpdates
02-Oct-2022 13:07 ASN Update Bot Added

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org