ASN Wikibase Occurrence # 286320
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 4 February 2008 |
Time: | 11:30 LT |
Type: | Piper PA-32R-301T |
Owner/operator: | Private |
Registration: | N73BL |
MSN: | 3257450 |
Total airframe hrs: | 235 hours |
Engine model: | Lycoming TIO-540-AH1A |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Parowan, Utah -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Las Vegas-North Las Vegas Airport, NV (VGT/KVGT) |
Destination airport: | Parowan, UT (1L9) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:During a landing on a runway covered by about two to three inches of freshly fallen snow, one of the airplane's main landing gear impacted a snow covered mound of previously plowed snow that had hardened. That impact threw the airplane sideways, whereupon it collided with more of the previously plowed and hardened snow, resulting in the collapse of all the landing gear struts. The investigation determined that the last time that the runway was plowed, the snow had not been cleared all the way to the edge of the runway's paved surface, and there was therefore piles of previously plowed snow on the outer portions of the runway surface. Some of that snow was located 10 to 12 feet inboard of the edge of the runway surface. When the new snow fell, it became very hard to distinguish between the area where the previously cleared surface was covered only by the newly fallen snow, and the area where the chunks of previously plowed snow had piled up, hardened, and then been covered by the new snow. The pilot departed the same airport two days before the accident, and had seen the condition of the partially plowed runway. When he returned for landing on the day of the accident, he assumed that the old snow had been cleared away prior to the new snow falling, and that the entire runway was then covered only with the two to three inches of freshly fallen snow. Because he made that assumption, the pilot did not take advantage of the opportunity to perform a low approach and inspect the entire runway surface prior to landing. Soon after the airplane touched down, the pilot realized that the previously plowed snow was still on the edges of the runway, and that he had not touched down on the centerline. The pilot saw the chunks of snow-covered old snow prior to the impact, but before he could take remedial action, one of the airplane's main gear collided with a chunk of hardened old snow, and the accident sequence was initiated.
Probable Cause: The pilot's improper in-flight decision not to over fly/inspect the snow covered runway prior to landing, and his failure to align the airplane over the centerline of the runway. Contributing to the accident was the snow covered runway, the airport operator's failure to properly plow and clear the runway, and hidden obstructions (previously plowed snow) under the freshly fallen snow.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | SEA08LA069 |
Status: | Investigation completed |
Duration: | 3 months |
Download report: | Final report |
|
Sources:
NTSB SEA08LA069
Location
Revision history:
Date/time | Contributor | Updates |
03-Oct-2022 08:55 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation