ASN Wikibase Occurrence # 286648
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Saturday 22 August 2009 |
| Time: | 15:15 LT |
| Type: |  Air Tractor AT-301A |
| Owner/operator: | Jp's Agricair Inc |
| Registration: | N3651R |
| MSN: | 301-0261 |
| Year of manufacture: | 1980 |
| Total airframe hrs: | 7209 hours |
| Engine model: | Honeywell TPE331-5-151A |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | New Miner, Wisconsin -
 United States of America
|
| Phase: | Manoeuvring (airshow, firefighting, ag.ops.) |
| Nature: | Agricultural |
| Departure airport: | Bancroft, WI (KPVT) |
| Bancroft, WI (KPVT) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot reported a complete loss of engine power about 15 minutes after takeoff during an agricultural application pass. He executed a forced landing into a tree plantation adjacent to the agricultural field. A postaccident inspection of the engine revealed that the torsion shaft had separated near the forward bushing journal. The fracture surfaces exhibited features consistent with fatigue failure. In addition, chromium plating was observed at all three bearing journals. Further examination by NTSB materials engineers determined that the torsion shaft fractured due to fatigue that was likely initiated by cracks in the chromium plate repair of the shaft. The plating itself was porous with radial cracks at all journal locations. Records indicated that the torsion shaft was newly overhauled when it was installed in the engine, about 3 1/2 years prior to the accident. However, detailed records related to the overhaul work were not available and the source of the chrome plating could not be determined. The engine manufacturer stated that chrome plating was not specified for production parts, nor was it permitted during component overhaul. A service bulletin recommending replacement of the torsion shaft had not been completed. The bulletin recommended replacement of the original (long) torsion shaft with a shorter shaft. The bulletin noted that the long torsion shafts were susceptible to bushing and bushing journal wear, which would be reduced by installation of the short torsion shafts.
Probable Cause: A total loss of engine power due to the fatigue failure of the engine torsion shaft. Contributing to the accident was the chrome plating of the shaft by an undetermined maintenance/overhaul facility.
Accident investigation:
 |
|
Sources:
NTSB CEN09LA602
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 03-Oct-2022 13:56 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation