ASN Wikibase Occurrence # 286780
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 21 July 2009 |
Time: | 13:00 LT |
Type: | Piper PA-46-350P Malibu Mirage |
Owner/operator: | Private |
Registration: | N117KR |
MSN: | 4636088 |
Year of manufacture: | 1997 |
Total airframe hrs: | 1818 hours |
Engine model: | Lycoming TIO-540 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Redmond, Oregon -
United States of America
|
Phase: | Approach |
Nature: | Private |
Departure airport: | Novato Airport, CA (NOT/KDVO) |
Destination airport: | Redmond-Roberts Field, OR (RDM/KRDM) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that during the approach to the airport, the landing gear down and locked indicator lights (3-green) did not illuminate when the landing gear handle was placed in the down position. The pilot cycled the landing gear; however, the landing gear lights did not illuminate and the pilot activated the emergency landing gear extension system and declared an emergency. After the emergency was declared, the pilot noted flames emanating from the engine cowling and the cockpit began to fill with smoke. Shortly thereafter tower personnel reported that the airplane was trailing smoke and the pilot was cleared to land. The pilot reported that on short final to the runway the "engine experienced a significant, uncommanded decrease in power, but continued to provide partial power." After landing, the pilot and passenger exited the airplane and the fire was extinguished by airport fire department personnel. Examination of the airframe and engine revealed that the nose landing gear hydraulic actuator hose was separated from its corresponding B-nut coupler. The B-nut fitting remained attached to the threaded end of the hydraulic actuator; however, the hose was separated from the coupler at the coupler flange. The hose was covered by dark soot and extensive thermal damage was noted. The opposing end of the hydraulic hose was secured to its associated coupler and fitting. The hydraulic hose is positioned below the engine, adjacent to the turbo charger and exhaust. The examination also revealed that the upper right crossover exhaust pipe was separated from the intermediate crossover exhaust pipe. Fire damage was noted on both the internal and external exposed ends of both the intermediate and right crossover exhaust pipes in the area where they were intended to be connected. The hydraulic hose and associated coupler were removed from the airframe and examined by Safety Board investigators. Due to the extensive thermal damage, the failure mode of the hose was not determined, and the correlation between the exhaust leak and separated hydraulic hose was not established. Subsequent to the accident, the manufacturer amended the maintenance manual for the airplane to reflect changes in the service life limits for nose landing gear hydraulic hoses. The amendment states "Replace nose gear hydraulic hoses (gear actuator/door actuator/ sequence valve), as required; but do not exceed 1,000 hours time-in-service, or eight (8) years, whichever comes first."
Probable Cause: An undetermined hydraulic system malfunction in the engine compartment during descent from cruise flight which resulted in an in-flight fire.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | WPR09LA361 |
Status: | Investigation completed |
Duration: | 1 year and 5 months |
Download report: | Final report |
|
Sources:
NTSB WPR09LA361
Location
Revision history:
Date/time | Contributor | Updates |
03-Oct-2022 16:00 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation