ASN Wikibase Occurrence # 287500
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Wednesday 8 August 2012 |
| Time: | 11:30 LT |
| Type: | Santana PA-18 REPLICA |
| Owner/operator: | |
| Registration: | N3AK |
| MSN: | TC0604104 |
| Year of manufacture: | 2011 |
| Total airframe hrs: | 47 hours |
| Engine model: | Lycoming O-360-EXP |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Ronan, Montana -
 United States of America
|
| Phase: | Landing |
| Nature: | Private |
| Departure airport: | Ronan, MT (7S0) |
| Ronan, MT (7S0) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The private pilot, who was also the owner/builder of the airplane, reported that he had flown a left traffic pattern in the tailwheel-equipped airplane and that the wind was light and variable. The pilot then conducted a wheel landing, and he reported that it was normal. However, immediately after he lowered the tailwheel to the runway, the airplane veered rapidly right and then skidded off of the runway into grass.
On-scene examination of the wreckage revealed that both of the tailwheel chains that normally connected the rudder horns to the tailwheel steering arms were disconnected from their respective springs. The end link of one of the chains was fractured, whereas the end link of the other chain was intact. The chains were different lengths, which was consistent with the possible failure and loss of one or more links. During subsequent disassembly of the tailwheel pivot mechanism, some springs and internal components were found fractured, and at least one of the springs was found jammed, which prevented the tailwheel from pivoting.
Although the investigation could not determine when or why the chains failed or became disconnected, significantly increased or complete resistance to tailwheel pivoting could result in the failure of one or both chains. The available evidence is consistent with the tailwheel having become jammed, and possibly uncontrollable, in a noncentered position during flight, which resulted in the airplane entering a right veer during the landing roll from which the pilot could not recover. The maintenance technician who disassembled the tailwheel after the accident reported that the damage to the pivot mechanism did not result from the accident.
Probable Cause: A jammed tailwheel assembly, which resulted in the pilot's inability to maintain directional control upon landing.
Accident investigation:
 |
|
Sources:
NTSB WPR12LA348
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 04-Oct-2022 11:29 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation