ASN Wikibase Occurrence # 288161
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Monday 23 August 2010 |
| Time: | 08:45 LT |
| Type: |  Cessna U206 |
| Owner/operator: | Private |
| Registration: | N29100 |
| MSN: | U206-1072 |
| Year of manufacture: | 1968 |
| Total airframe hrs: | 6146 hours |
| Engine model: | Teledyne Continental IO-520-F4B |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Grangeville, Idaho -
 United States of America
|
| Phase: | Landing |
| Nature: | Ferry/positioning |
| Departure airport: | Concord, ID |
| Granville, ID (S80) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot reported that, during the landing roll on a turf airstrip, he noticed rattling and shaking after the nosewheel touched down, but had no problem holding a straight line. After taxiing to the tie-down area and parking the airplane, the pilot inspected the nose gear and found that the upper end of the nose gear scissor had separated from the casting and was lying on the tire. The pilot reported that he walked out to where he touched down and observed tire tracks on the grass, and it appeared that the nosewheel track began after a large ground squirrel hole. The pilot contacted his mechanic, who informed him that he should be able to fly home if he tied the nose gear scissor up. Before departing, the pilot taxied about 1,000 feet on the runway and made two 180-degree turns with no problems encountered. During the landing at his destination, the pilot held the nose gear off of the ground for about 1,500 feet. When the nosewheel contacted the ground, the airplane made a hard left turn that the pilot could not stop with right rudder and brake. When the airplane reached the edge of the runway, it nosed over. The pilot indicated that the nosewheel had evidently cocked 90 degrees prior to the landing.
Probable Cause: The pilot's decision to fly with a known defective nosewheel assembly, which resulted in a loss of directional control and nose-over on landing after the assembly shifted out of alignment during the flight.
Accident investigation:
 |
|
Sources:
NTSB WPR10LA421
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 04-Oct-2022 19:09 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation