Accident Lindstrand Balloons 105A N1410C,
ASN logo
ASN Wikibase Occurrence # 292189
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Wednesday 14 June 2006
Time:19:00 LT
Type:Silhouette image of generic BALL model; specific model in this crash may look slightly different    
Lindstrand Balloons 105A
Owner/operator:Airventure Balloonport, Inc
Registration: N1410C
MSN: 5184
Fatalities:Fatalities: 0 / Occupants: 2
Aircraft damage: Substantial
Category:Accident
Location:Frisco, Texas -   United States of America
Phase: Unknown
Nature:Unknown
Departure airport:Plano, TX
Destination airport:
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The 6,500-hour airline transport rated pilot reported on the Pilot/Operator Accident Incident Report (NTSB Form 6120.1) that he elected to land the hot air balloon in a large open field that was bordered on the approach heading by a large housing area that contained mostly 2-story homes, and was bordered by utility power lines. The pilot added that after clearing the power lines, he initiated his planned shallow approach to the open field. The pilot was aware that the grass at the intended landing location was tall, approximately knee high. The pilot discussed with his balloon pilot rated passenger that he would turn off the pilot light valve on one burner and only use the second burner until he was assured clearance of obstacles for a safe landing. After the balloon cleared the power lines, the pilot "vented for approximately 1 second" and began a gentle descent. The pilot added that "it appeared my approach angle was good" and he announced to his passenger that he was going to turn off the second burner for landing. The approach angle was then noted to be near vertical and a hard landing was imminent. During the hard landing sequence the pilot was ejected from the basket. The approximate 200 pounds of weight change caused the balloon to become airborne again. The pilot rated passenger, who remained in the basket, relit a burner in an attempt to get heat back into the balloon. With the balloon top out and the balloon mouth closed, fabric had to be burned away in an attempt to get heat into the envelope to slow the descent. The basket again made contact with the ground and the passenger elected to exit the basket as the lower panels of the balloon were on fire. The balloon again became airborne with no one on board. The basket was dragged across the field creating several small grass fires and came to rest upon being entangled with a light pole. The pilot and passenger were not injured. The basket was destroyed and the balloon was substantially damaged. The grass fires and the balloon fire were extinguished by the local fire department. Weather at the time was reported to be clear skies, winds 160 degrees at 12 knots, visibility of 10 statute miles and a temperature of 91 degrees Fahrenheit.

Probable Cause: The pilot's failure to maintain the proper glidepath while landing. Contributing factors were the prevailing high winds and the downdraft encountered on final approach.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: DFW06CA161
Status: Investigation completed
Duration: 3 months
Download report: Final report

Sources:

NTSB DFW06CA161

Revision history:

Date/timeContributorUpdates
08-Oct-2022 15:32 ASN Update Bot Added

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org