ASN Wikibase Occurrence # 298087
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Thursday 4 January 2018 |
Time: | 19:00 LT |
Type: | Bell 407 |
Owner/operator: | Air Methods Corp |
Registration: | N214AM |
MSN: | 54485 |
Year of manufacture: | 2014 |
Engine model: | Rolls Royce 250-C47B |
Fatalities: | Fatalities: 0 / Occupants: 3 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Norfolk, Nebraska -
United States of America
|
Phase: | Standing |
Nature: | Ferry/positioning |
Departure airport: | Omaha, NE |
Destination airport: | Norfolk, NE |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot and two medical crewmembers were on a return flight to a hospital helipad. During the approach to the helipad, the crew heard a noise outside the helicopter. The medical crewmembers reported they felt a slight "shudder" on the helicopter but attributed it to the wind as they approached the helipad. The pilot heard the noise, but there was no effect on the controls or flight characteristics, so he continued the landing without further incident. After engine shutdown, the oncoming pilot noticed that the helicopter's tail rotor drive shaft cover was missing. The surrounding area near the helicopter's approach path was searched, and the missing cover was found.
An examination of the helicopter noted substantial damage to the tail rotor drive shaft.
The day before the accident, scheduled maintenance was performed on the helicopter's tail rotor pitch change mechanism, which required removal of the drive shaft cover. The cover was reinstalled, and no problems were reported during a subsequent preflight inspection.
It is likely that maintenance personnel did not properly secure the cover fasteners after the cover was reinstalled.
Probable Cause: Maintenance personnel's failure to properly secure the tail rotor drive shaft cover, which resulted in the cover departing the helicopter in flight.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN18CA072 |
Status: | Investigation completed |
Duration: | 1 month |
Download report: | Final report |
|
Sources:
NTSB CEN18CA072
Location
Revision history:
Date/time | Contributor | Updates |
15-Oct-2022 12:48 |
ASN Update Bot |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation