ASN Wikibase Occurrence # 299530
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 20 September 2022 |
Time: | |
Type: | SkySpotter 152 |
Owner/operator: | |
Registration: | |
MSN: | |
Fatalities: | Fatalities: 0 / Occupants: 0 |
Aircraft damage: | Substantial |
Location: | Troskovice -
Czech Republic
|
Phase: | En route |
Nature: | Test |
Departure airport: | |
Destination airport: | |
Confidence Rating: | Information is only available from news, social media or unofficial sources |
Narrative:During a test flight in autonomous mode, during visual contact with the operator, the unmanned helicopter experienced a technical malfunction in the control electronics.
The operator switched to manual control of the unmanned helicopter and performed an emergency landing in a field approximately 1.7 km away.
Due to the distance between the operator and the landing site, it was not possible to fully correct the landing phase with the roughness of the surrounding terrain and the UAV overturned on landing in the field.
It was partially damaged and the electrical wiring subsequently caught fire. The fire extinguished itself within a few tens of seconds.
The unmanned helicopter was damaged extensively. There was no other damage.
Sources:
https://uzpln.cz/pdf/20221020094447.pdf Revision history:
Date/time | Contributor | Updates |
20-Oct-2022 11:33 |
harro |
Added |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation