This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Sunday 10 September 2000 |
| Time: | 10:38 LT |
| Type: |  Boeing 727-224 |
| Owner/operator: | Sun Country Airlines |
| Registration: | N296SC |
| MSN: | 22449/1756 |
| Year of manufacture: | 1981 |
| Engine model: | P&W JT8D-15 |
| Fatalities: | Fatalities: 0 / Occupants: 101 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | MINNEAPOLIS, MN -
 United States of America
|
| Phase: | Taxi |
| Nature: | Passenger - Scheduled |
| Departure airport: | (KMSP) |
| San Francisco International Airport, CA (SFO/KSFO) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The Boeing 727-224 number 3 wheel assembly failed during taxi for takeoff and pieces of the wheel assembly impacted the airframe causing damage. Examination of the wheel assembly revealed a fatigue failure that emanated from a point at the inside diameter of one of the brake lugs. A circumferential scratch was found adjacent to the fatigue origin. The wheel half had been inspected by an approved repair station and shipped to the airline on July 21, 2000. The wheel was installed on the accident aircraft and had accumulated 356.2 hours time in service at the time of the accident. A review of repair station records revealed that the repair station had been rejecting about 4 wheel halves per month. Prior to the accident, the repair station was finding cracks on other wheel halves in the area where the wheel failure occurred. The repair station had been in contact with the wheel manufacturer concerning this matter and had sent representative wheel halves to the manufacturer for evaluation. In a conversation with a representative of the Federal Aviation Administration, the wheel manufacturer stated that one of the returned wheel halves had been examined and that a manufacturing defect had created a stress concentrator, which resulted in a fatigue failure of the wheel half. The wheel manufacturer issued a Service Bulletin to rework the lugs and to provide guidance in inspecting the affected areas of the wheel assembly.
Probable Cause: The fatigue failure of the wheel assembly. A factor was the inadequate inspection procedures prior to the issuance of a service bulletin.
Accident investigation:
 |
|
Sources:
NTSB CHI00LA296
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 25-Mar-2024 11:51 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation