ASN Wikibase Occurrence # 38826
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Saturday 18 December 1999 |
Time: | 17:17 LT |
Type: | Globe GC-1B |
Owner/operator: | Thomas A. Barr |
Registration: | N80951 |
MSN: | 1144 |
Total airframe hrs: | 2565 hours |
Engine model: | Franklin 6A-350-C1R |
Fatalities: | Fatalities: 1 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Edgewood, TX -
United States of America
|
Phase: | En route |
Nature: | Private |
Departure airport: | Sulphur Springs, TX |
Destination airport: | Canton, TX (1TA7) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot made a radio call indicating that he had an engine problem or failure and was going down. Witnesses observed the airplane maneuvering at a low altitude with the propeller not turning. As the airplane made a turn, its nose dropped, and the airplane descended and impacted the ground. Examination of the accident site revealed that the airplane impacted the ground in a nose down attitude. An examination of the WSK 'PZL-Rzeszow' (PZL) Franklin 6A-350-C1R engine revealed that the engine driven fuel pump had failed. It was determined that the inlet and outlet valve stems fractured due to fatigue. According to a PZL representative, PZL did not know who manufactured the pump and did 'not know characteristics' of the pump. Research revealed that this fuel pump was designed for use in the Chevrolet Corvair automobile. According to the pump manufacturer, the pump was intended strictly for automotive applications, and not intended for aviation use. The pump was designed to operate at 5.4 pounds per square inch minimum and 6.9 pounds per square inch maximum static pressure at the pump outlet when the pump is operated at 1,800 revolutions per minute. According to the PZL representative, the operating limits for fuel pressure in model 6A-350-C1R engines are 0.5 pounds per square inch minimum to 8.5 pounds per square inch maximum. The FAA issued 'Type Certification Data Sheet No. E9EA' for the PZL Franklin 6A-350-C1R engine on December 8, 1994.
Probable Cause: the pilot's failure to maintain aircraft control during a forced landing which resulted in a stall/spin. Contributing factors were the failure of the engine driven fuel pump, the engine manufacturer's use of an inadequate fuel pump which was only intended for automobile engines, and the FAA's certification of the engine with an inadequate component.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | FTW00FA046 |
Status: | Investigation completed |
Duration: | 1 year and 6 months |
Download report: | Final report |
|
Sources:
NTSB FTW00FA046
History of this aircraft
Other occurrences involving this aircraft Location
Revision history:
Date/time | Contributor | Updates |
24-Oct-2008 10:30 |
ASN archive |
Added |
21-Dec-2016 19:23 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
14-Dec-2017 10:01 |
ASN Update Bot |
Updated [Operator, Source, Narrative] |
07-Apr-2024 16:09 |
ASN Update Bot |
Updated [Time, Operator, Other fatalities, Departure airport, Source, Narrative, Category, Accident report] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation