ASN Wikibase Occurrence # 72644
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 14 February 2005 |
Time: | |
Type: | Diamond DA20-C1 Eclipse |
Owner/operator: | Moncton Flying Club |
Registration: | C-GMFF |
MSN: | C0230 |
Year of manufacture: | 2003 |
Engine model: | Teledyne Continental IO-240-B |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Location: | near Moncton, New Brunswick -
Canada
|
Phase: | En route |
Nature: | Training |
Departure airport: | Moncton |
Destination airport: | Moncton |
Confidence Rating: | Information verified through data from accident investigation authorities |
Narrative:The solo student pilot was practising power-off stalls at 3500 feet in C-GMFF, a Diamond Katana DA-20-C1, 20 NM East of the Moncton airport. On the third power-off stall recovery the pilot attempted to advance the throttle lever, but the handle resisted forward movement. Manipulating the throttle lever did not have any effect on the engine RPM which remained at idle (approximately 1000 RPM). When the pilot released the throttle lever it would spring back to the idle position. The pilot contacted Moncton tower, declared a Mayday, and informed ATC of his intention to force land. During the approach the pilot secured the engine, shut off the fuel, and activated the ELT. The aircraft was then landed on a snow covered field. During the rollout the nose wheel dug in and the aircraft pitched onto its nose before coming to rest upright. The pilot evacuated the aircraft with the ELT and fire extinguisher in hand. The pilot was uninjured and rescue personnel were on the scene minutes after the event. The aircraft was substantially damaged. The throttle cable servo rod end bearing was found to be seized, which prevented any movement of the attached arm and the associated butterfly valve. The rod end, P/N HF3M was removed and sent to the TSB Engineering Branch for examination.
Sources:
CADORS 2005A0114
Revision history:
Date/time | Contributor | Updates |
13-Feb-2010 23:40 |
slowkid |
Added |
27-May-2010 09:10 |
TB |
Updated [Aircraft type, Location] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation