ASN Wikibase Occurrence # 75706
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Friday 16 July 2010 |
| Time: | 15:30 |
| Type: |  Robinson R44 Raven II |
| Owner/operator: | Pathfinder Helicopters |
| Registration: | N944DW |
| MSN: | 10439 |
| Year of manufacture: | 2004 |
| Total airframe hrs: | 2195 hours |
| Engine model: | Lycoming IO-540 SER |
| Fatalities: | Fatalities: 0 / Occupants: 2 |
| Other fatalities: | 1 |
| Aircraft damage: | Substantial |
| Location: | Salt Lake City International Airport, Salt Lake City, Utah -
 United States of America
|
| Phase: | Manoeuvring (airshow, firefighting, ag.ops.) |
| Nature: | Ferry/positioning |
| Departure airport: | Salt Lake City International Airport, Salt Lake City, Utah (KSLC) |
| Salt Lake City International Airport, Salt Lake City, Utah (KSLC) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
On July 16, 2010, about 15:30 MDT (Mountain Daylight Time), a Robinson R44 Raven II helicopter, N944DW, impacted the asphalt parking ramp between a row of hangars at Salt Lake City International Airport, Salt Lake City, Utah. The commercial pilot and his passenger received serious injuries, one person on the ground received serious injuries, and one person on the ground was killed during the accident sequence. The helicopter, which was owned by Veracity Leasing LLC, and operated by Pathfinder Helicopters, sustained substantial damage. The 14 Code of Federal Regulations Part 91 repositioning flight took place in visual meteorological conditions. No flight plan had been filed.
According to the operator, the pilot planned to take off from the asphalt ramp and land on a flatbed trailer that was connected to a pickup truck located a few feet away. Then, once strapped down, the helicopter was to be taken by trailer to a distant location. According to the pilot, at the beginning of this process, he and one of the individuals that was helping with the loading sequence, wheeled the helicopter out of the hangar, and then once the helicopter was fully clear of the hangar, they removed the ground-movement wheels from the helicopter's skids. The pilot then had the individual who had helped him roll the helicopter out of the hangar get into the left front seat of the helicopter, in order to equalize the lateral load while he was landing on the trailer. The pilot then picked the helicopter off the ground and hovered over to the location of the trailer. He then successfully landed on the trailer, lowered the collective, and rolled the throttle to ground idle. At that time another individual who was helping with the loading process approached the trailer to take a look at the positional relationship between the helicopter's skids and the skid locks on the trailer. It was then determined that the helicopter might have been too far to the right to get the skid locks to fasten on the skids. Therefore the person who had approached the trailer tried to fasten the skid locks down, but was unable to get them to fully close. After talking to the individual on the ground, the pilot decided to, "… raise the collective to get light on the skids and slide a couple of inches over to the left." He therefore brought the throttle to flight idle, and raised the collective, "to get light on the skids." According to the pilot, during this process he, "…did not lift off the trailer." He then used cyclic inputs to try to get the helicopter to move to the left, but initially he was unable to get it to move. He therefore continued trying to get the helicopter to slide to the left, and eventually, "… it just gave way." At that point, the nose of the helicopter went left, and the aft part of the right skid went off the trailer, and the helicopter, "… started to fall off the trailer backwards."
In an effort to lift the helicopter clear of the trailer and regain directional control, the pilot immediately applied up collective and forward cyclic. These actions resulted in the helicopter lifting off the trailer, but because of the forward positioning of the cyclic control, the main rotor blades tilted forward and impacted the cab of the pickup truck. Once the rotor blades made contact with the truck, the helicopter spun around about 180 degrees and impacted the tarmac beside the trailer. During that sequence, a main rotor blade hit the individual standing next to the trailer, the right seat passenger was ejected from the helicopter, and one other person on the ground was injured seriously. After the helicopter impacted the tarmac, because the engine was still running and the rotors were still turning, the pilot disengaged the rotor clutch, turned the master switch off, and turned the keys to the OFF position. Just as the pilot was turning the key to the OFF position, a rapidly growing fire started on the outside of the helicopter. The pilot then unhooked his seat belt and crawled out of the helicopter through the broken front windscreen. The pilot then helped the ejected passenger, who was kneeling on the left rear portion of the trailer, to get away from the accident scene. The pilot and another person then pulled the individual who had been hit by the rotor blade away from the wreckage and fire.
A Federal Aviation Administration (FAA) directed/monitored post-accident inspection of the helicopter wreckage did not reveal any evidence of an engine or flight control malfunction or anomaly, and the operator of the helicopter indicated on the NTSB Form 6120.1 that there had not been any mechanical malfunction or failure.
Probable Cause: The pilot's loss of directional control while attempting to move the helicopter laterally without first lifting it fully off its landing platform.
Accident investigation:
 |
|
Sources:
NTSB
2. FAA Registration: https://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?omni=Home-N-Number&nNumberTxt=N944DW
3. http://helihub.com/2010/07/16/16-jul-10-n944dw-robinson-r44-salt-lake-city-us-utah-1f/
4. https://www.deseretnews.com/article/700048827/1-dead-3-injured-in-helicopter-crash-at-Salt-Lake-airport.html?s_cid=rss-32
5. https://planecrashmap.com/plane/ut/N944DW/
6. https://uk.flightaware.com/resources/registration/N944DW
7. https://abpic.co.uk/pictures/view/1088122
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 17-Jul-2010 02:51 | gerard57 | Added |
| 19-Jul-2010 15:28 | RobertMB | Updated [Aircraft type, Registration, Cn, Operator, Location, Nature, Departure airport, Destination airport, Source] |
| 21-Dec-2016 19:25 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 26-Nov-2017 18:00 | ASN Update Bot | Updated [Operator, Total fatalities, Total occupants, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
| 10-Nov-2018 16:46 | Dr.John Smith | Updated [Time, Location, Departure airport, Destination airport, Source, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation