ASN Wikibase Occurrence # 326326
This accident is missing citations or reference sources. Please help add citations to guard against copyright violations and factual inaccuracies.
Date: | Wednesday 3 May 1989 |
Time: | 02:35 |
Type: | Armstrong Whitworth AW-650 Argosy 222 |
Owner/operator: | IPEC - Interstate Parcel Express Company |
Registration: | VH-IPA |
MSN: | 6803 |
Year of manufacture: | 1965 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial, repaired |
Category: | Accident |
Location: | Melbourne-Tullamarine Airport, VIC (MEL) -
Australia
|
Phase: | Taxi |
Nature: | Cargo |
Departure airport: | Sydney-Kingsford Smith International Airport, NSW (SYD/YSSY) |
Destination airport: | Melbourne-Tullamarine Airport, VIC (MEL/YMML) |
Investigating agency: | BASI |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:While taxiing after a normal landing, a rumbling noise was heard from the vicinity of the nosegear, the hydraulic low pressure light illuminated and nosegear steering authority was lost. The right hand nosewheel had separated from the aircraft due to fracturing of the axle. As the nosewheel departed it damaged the nosegear uplock assembly with consequent loss of hydraulic system integrity. It then continued under the fuselage causing skin damage.
The nosewheel axle was recovered and subjected to metallurgical examination which showed that the fracture was due to fatigue. The fracture resulted from prior long term fatigue cracking which occupied approximately 75 of the cross sectional area of the axle. Stress corrosion cracks were present which were the most likely initiator of the fatigue cracks. A mandatory crack inspection requirement called up for this axle did not cover the specific area in which the stress corrosion was located. Consequently, during the axle refurbishment, the stress corrosion cracks were covered by a layer of electroplated chromium.
Significant Factors:
1. The nosewheel axle failed due to fatigue initiated by stress corrosion cracks.
2. The recurrent Non Destructive Inspection for the axles does not address the area where the stress corrosion occured. Consequently, pre- and post- refurbishment inspections did not detect the cracks.
Accident investigation:
|
| |
Investigating agency: | BASI |
Report number: | 198901542 |
Status: | Investigation completed |
Duration: | 9 months |
Download report: | Final report |
|
Sources:
Revision history:
Date/time | Contributor | Updates |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation