ASN Wikibase Occurrence # 145018
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Friday 30 March 2012 |
| Time: | 09:43 |
| Type: |  Aérospatiale SA 315B Lama |
| Owner/operator: | Trans Aero Helicopters, Ltd |
| Registration: | N929JV |
| MSN: | 2361 |
| Year of manufacture: | 1973 |
| Total airframe hrs: | 12160 hours |
| Engine model: | Turbomeca Artouste IIIB |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | 25 miles from Alva, OK -
 United States of America
|
| Phase: | En route |
| Nature: | External load operation |
| Departure airport: | Alva, OK (KAVK) |
| Alva, OK (KAVK) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The helicopter was flying at 300 feet above the ground with an external load when the pilot heard a loud noise from the engine and the rotor rpm began to decay. He jettisoned the load and entered an autorotation. During the flare, the helicopter's main rotor blades contacted the tail rotor drive shaft. Engine disassembly and examination revealed that the turbine casing was deeply eroded by particles that had accumulated in the casing as a result of operating in dusty environments. The erosion caused a crack to develop, and non-uniform overheating of the engine led to the partial melting of the nozzle guide vanes and the rupture of the blade tips in all three turbine stages. Uncontained debris then punctured the turbine casing and shroud. According to the helicopter's maintenance records, the helicopter had operated 68 hours past a 100-hour inspection. The erosion in the engine was likely preexisting since it had been purchased second hand. Further, the records contained no entries pertaining to compliance with the manufacturer's maintenance procedures, by either the current or previous owner, for operations in sandy environments. The current operator reported that they have since complied with the manufacturer’s procedures.
Probable Cause: Failure of the current and previous operators to comply with the manufacturer's maintenance procedures for operation in sandy environments, which resulted in turbine case erosion and the subsequent uncontained engine failure.
Accident investigation:
 |
|
Sources:
NTSB
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 13-Apr-2012 12:03 | Geno | Added |
| 31-Dec-2012 14:58 | Anon. | Updated [Nature, Damage, Narrative] |
| 01-Oct-2014 08:11 | harro | Updated [Aircraft type] |
| 21-Dec-2016 19:28 | ASN Update Bot | Updated [Time, Damage, Category, Investigating agency] |
| 27-Nov-2017 20:27 | ASN Update Bot | Updated [Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation