Accident Cessna 175B Skylark N8125T,
ASN logo
ASN Wikibase Occurrence # 153006
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Saturday 2 February 2013
Time:13:50
Type:Silhouette image of generic C175 model; specific model in this crash may look slightly different    
Cessna 175B Skylark
Owner/operator:Private
Registration: N8125T
MSN: 17556825
Year of manufacture:1960
Engine model:Lycoming O-360-A1B
Fatalities:Fatalities: 0 / Occupants: 5
Aircraft damage: Substantial
Category:Accident
Location:A field near Wellsville, UT -   United States of America
Phase: Landing
Nature:Private
Departure airport:Logan, UT
Destination airport:Logan, UT
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The pilot reported that during a climb to cruise flight, he observed the engine rpm suddenly reduce, and he immediately applied carburetor heat. The pilot stated that the engine rpm increased for about 3 seconds before it decreased again. The pilot began troubleshooting the engine and performing the emergency landing checklist. The pilot stated that when he turned the ignition switch off and back on, the engine backfired once; however, the engine rpm remained at 1,000. He initiated a forced landing to an open, snow-covered field. During the landing roll, the airplane nosed over. A postaccident examination of the airframe and engine revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation. The carburetor was disassembled and examined internally. The carburetor float bowl contained a liquid consistent with fuel, which tested positive for water using water-finding paste.

A local reporting station recorded the temperature at 25 degrees Fahrenheit and dew point at 19 degrees Fahrenheit. The reported weather conditions were conducive to carburetor icing at glide and cruise power. Given the sudden loss of engine rpm before and the rise in engine rpm following the application of carburetor heat, it is likely that carburetor ice was the reason for the loss of engine power.
Probable Cause: A loss of engine power during cruise flight due to carburetor ice.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: WPR13LA108
Status: Investigation completed
Duration:
Download report: Final report

Sources:

NTSB
FAA register: http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=8125T

Location

Media:

Revision history:

Date/timeContributorUpdates
02-Feb-2013 22:11 Geno Added
02-Feb-2013 22:12 Geno Updated [Narrative]
21-Feb-2013 09:43 Yuri166 Updated [Embed code]
21-Feb-2013 09:45 harro Updated [Embed code]
21-Dec-2016 19:28 ASN Update Bot Updated [Time, Damage, Category, Investigating agency]
13-Jan-2017 20:35 Iceman 29 Updated [Embed code]
28-Nov-2017 14:08 ASN Update Bot Updated [Operator, Other fatalities, Departure airport, Destination airport, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org