ASN Wikibase Occurrence # 164227
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Sunday 23 February 2014 |
Time: | 14:05 |
Type: | Cessna P210N Centurion |
Owner/operator: | Private |
Registration: | N18DP |
MSN: | P21000086 |
Year of manufacture: | 1978 |
Total airframe hrs: | 4500 hours |
Engine model: | Continental TSIO520P (1B) |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | North of Skypark Airport (KBTF), Bountiful, UT -
United States of America
|
Phase: | Take off |
Nature: | Private |
Departure airport: | Bountiful, UT (BTF) |
Destination airport: | Heber, UT (36U) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that the accident flight was the first flight in the airplane since its annual inspection, which occurred about 6 weeks before the accident. He conducted a thorough preflight inspection and run-up. Before takeoff, he added full power with the brakes applied, and, after noting no abnormal engine or instrument indications, he took off. When the airplane reached about 150 to 200 ft above the ground, the engine started to run roughly. The airplane was unable to maintain altitude, so the pilot executed a forced landing to a nearby field. During the landing, the airplane sunk into the mud and nosed over.
Postaccident examination of the engine revealed that the fuel lines connected to the input and output of the fuel flow indicator were loose and leaking. After these lines were tightened about 1.5 turns and pressure was applied, a third leak was found in the vicinity of a metal label on the fuel line between the fuel manifold and the fuel pressure gauge. The aircraft manufacturer’s service manual states that the engine compartment rubber hoses must be replaced every 5 years or at engine overhaul, whichever occurs first. According to the airplane’s maintenance logbook, the most recent engine overhaul occurred about 18 years before the accident. The mechanic who conducted the annual inspection reported that, during the inspection, he removed the fuel lines to and from the engine-mounted fuel flow transducer to troubleshoot a lack of indicated fuel pressure at the cockpit-mounted instrument. It is likely that the mechanic failed to adequately tighten the fuel lines when he reinstalled them.
Probable Cause: Fuel starvation due to the in-flight loosening of the fuel lines attached to the fuel flow indicator as a result of inadequate maintenance.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | WPR14LA118 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
24-Feb-2014 05:19 |
Geno |
Added |
03-Mar-2014 16:19 |
Geno |
Updated [Time, Nature, Destination airport, Source] |
21-Dec-2016 19:28 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
29-Nov-2017 13:33 |
ASN Update Bot |
Updated [Operator, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation