ASN Wikibase Occurrence # 169777
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 12 September 2014 |
Time: | 17:50 |
Type: | Glasair III |
Owner/operator: | Private |
Registration: | N39RD |
MSN: | 3073 |
Year of manufacture: | 1999 |
Total airframe hrs: | 605 hours |
Engine model: | Lycoming IO-540-K1A5 |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Austin Executive Airport (KEDC), Austin, Texas -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Oxford, MS (UOX) |
Destination airport: | Austin, TX (EDC) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that he landed the airplane with about 5 knots of extra airspeed in case he encountered a surface crosswind. The airplane touched down about 6 ft right of the runway centerline. Shortly after touchdown, the nosewheel began to shimmy violently. The pilot applied maximum braking to both pedals simultaneously to reduce the speed as he applied back stick pressure, but the nosewheel continued to shimmy. The nosewheel fork then failed, and the nose landing gear dug into the runway, which caused the airplane to veer off the right side of the runway. The nose landing gear collapsed in the soft ground, and the airplane subsequently nosed over. The postaccident examination of the nose landing gear, shimmy damper, and nosewheel revealed no evidence of mechanical malfunctions or failures that would have precluded normal operation.
The examination of the runway revealed a skid mark produced by the nosewheel tire, which indicated that the tire skidded back and forth while the airplane's direction continued straight down the runway. According to Federal Aviation Administration guidance, wheelbarrowing occurs when a pilot permits the airplane weight to become concentrated about the nosewheel during takeoff or landing, which can cause of a loss of directional control. One of the most common causes of wheelbarrowing during the landing roll is the simultaneous touchdown of the main wheels and nosewheel with excessive speed. The guidance states that “heavy braking should be avoided until the wings are devoid of lift and the airplane’s full weight is resting on the landing gear,” which is contrary to the pilot’s actions. The circumstances of the accident were consistent with the airplane wheelbarrowing during the landing.
Probable Cause: The pilot’s use of an improper attitude and airspeed during landing followed by excessive braking, which resulted in the airplane wheelbarrowing on the runway and a subsequent loss of directional control.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN14LA497 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB
https://flightaware.com/live/flight/N39RD/history/20140912/2000Z/KUOX/KEDC Location
Revision history:
Date/time | Contributor | Updates |
13-Sep-2014 07:25 |
bovine |
Added |
13-Sep-2014 15:42 |
Geno |
Updated [Aircraft type, Cn, Operator, Location, Source] |
13-Sep-2014 18:11 |
Anon. |
Updated [Narrative] |
14-Sep-2014 10:37 |
snj |
Updated [Source] |
21-Dec-2016 19:28 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
30-Nov-2017 19:10 |
ASN Update Bot |
Updated [Operator, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation