ASN Wikibase Occurrence # 17492
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Saturday 19 April 2008 |
Time: | 18:55 |
Type: | Cessna 175A Skylark |
Owner/operator: | Private |
Registration: | N6868E |
MSN: | 56368 |
Year of manufacture: | 1959 |
Total airframe hrs: | 2733 hours |
Engine model: | Continental GO-300 |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | near Pine Mountain Lake Airport, Groveland, CA -
United States of America
|
Phase: | Initial climb |
Nature: | Private |
Departure airport: | Groveland, CA (E45) |
Destination airport: | |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot, who was also a certificated airframe and powerplant mechanic, was conducting a series of high-speed taxi tests after installing a recently purchased engine. While performing the tests, the airplane's ground speed became excessive and it encountered a gust of wind. The airplane unintentionally became airborne and continued to climb. The pilot attempted to return back to the airport but the engine experienced a total loss of power. The airplane subsequently collided with a telephone pole and descended nose-low onto the road below. A Federal Aviation Administration inspector performed a postaccident examination of the airframe and engine. During the disassembly of the fuel line connecting the gascolator to the carburetor, he observed a condition inside the line known as a "flapper valve" at both end fittings. The inspector stated that this was the fuel line that the pilot had recently fabricated. He stated that the "flapper valve" condition can occur as a result of the end fittings being installed without using a mandrel, where the fitting edge cuts the inside of the hose creating a valve-like piece that obstructs fuel flow.
Probable Cause: A total loss of engine power due to fuel starvation as a result of a blocked fuel line that was improperly fabricated by the pilot. Also causal was the pilot's excessive ground speed during the taxi tests that resulted in an inadvertent takeoff.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | LAX08LA118 |
Status: | Investigation completed |
Duration: | 1 year |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
21-Apr-2008 10:08 |
Fusko |
Added |
27-Apr-2008 07:06 |
Fusko |
Updated |
21-Dec-2016 19:14 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
21-Dec-2016 19:16 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
21-Dec-2016 19:20 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
03-Dec-2017 10:42 |
ASN Update Bot |
Updated [Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation