Accident Eurocopter EC 120B Colibri N372HS, 13 Jun 2016
ASN logo
ASN Wikibase Occurrence # 190123
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:13-JUN-2016
Time:11:10
Type:Silhouette image of generic EC20 model; specific model in this crash may look slightly different    
Eurocopter EC 120B Colibri
Owner/operator:Department Of Homeland Security
Registration: N372HS
MSN: 1460
Fatalities:Fatalities: 0 / Occupants: 1
Aircraft damage: Substantial
Category:Accident
Location:Ajo, AZ -   United States of America
Phase: Standing
Nature:Unknown
Departure airport:Yuma, AZ (NYL)
Destination airport:Ajo, AZ
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The pilot of a skid equipped helicopter reported that after landing on a volcanic rock hill top, the pilot exited the running helicopter. The pilot further reported that he heard an audible change in the sound of the main rotor and observed the ground under the right skid of the helicopter give way and the helicopter rolled to the right.

The helicopter sustained substantial damage to the tail boom.

According to the pilot there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

The Federal Aviation Administration (FAA) has published FAA-H-8083-21A Helicopter Flying Handbook (2012). This handbook discusses pilots at the flight controls and states in part:

"Many helicopter operators have been lured into a "quick turnaround" ground operation to avoid delays at airport terminals and to minimize stop/start cycles of the engine. As part of this quick turn-around, the pilot might leave the cockpit with the engine and rotors turning. Such an operation can be extremely hazardous if a gust of wind disturbs the rotor disk, or the collective flight control moves causing lift to be generated by the rotor system. Either occurrence may cause the helicopter to roll or pitch, resulting in a rotor blade striking the tail boom or the ground. Good operating procedures dictate that, generally, pilots remain at the flight controls whenever the engine is running and the rotors are turning".
Probable Cause: The pilot's decision to exit the helicopter with the engine and rotors turning and the selection of unsuitable terrain for a landing, which resulted in a roll over.

Sources:

NTSB
FAA register: http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=N372HS

Accident investigation:
cover
  
Investigating agency: NTSB
Status: Investigation completed
Duration:
Download report: Final report
Location


Revision history:

Date/timeContributorUpdates
17-Sep-2016 09:31 Aerossurance Added
19-Aug-2017 16:35 ASN Update Bot Updated [Time, Operator, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2023 Flight Safety Foundation

701 N. Fairfax St., Ste. 250
Alexandria, Virginia 22314
www.FlightSafety.org