This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
Accident investigation report completed and information captured
Narrative: The RQ-4B, from the 9th Reconnaissance Wing at Beale AFB, California, was conducting a ferry flight from Edwards AFB, California, to Beale AFB at the time of incident. An aircrew of contractors from the Northrop Grumman Corporation was operating the aircraft at the time of the mishap. This aircraft has four navigators and operates with two “on” and two “off” while in a normal configuration. The AIB president found the cause of the mishap was one of the two in-use navigation systems on the remotely piloted aircraft produced erroneous navigational data and the other navigators did not detect the erroneous data. Shortly after takeoff, two of the navigators were disabled in accordance with standard procedure. The aircraft climbed and flew to planned waypoints uneventfully until one of the enabled navigators began producing erroneous navigational data. The aircraft failed to detect the erroneous data, causing the aircraft to roll into a nearly inverted position and enter a dive that resulted in excessive airspeed. The aircraft subsequently exceeded its structural limitations and was unable to recover. The aircraft broke up during flight and crashed in an unpopulated and rugged area between Lone Pine and Mount Whitney, California. The aircraft left a debris field from Lone Pine until its point of impact at Mount Whitney. The debris field included portions of the Inyo National Forest. Preliminary environmental analysis indicates no significant impact to the forest or wildlife. Portions of the wreckage have been recovered and the Air Force is working with the U.S. Forest Service for the remainder of the wreckage cleanup.