ASN Wikibase Occurrence # 19641
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Wednesday 23 April 2008 |
Time: | 16:30 |
Type: | Champion 7KCAB |
Owner/operator: | Private |
Registration: | N1682G |
MSN: | 137 |
Year of manufacture: | 1968 |
Total airframe hrs: | 1209 hours |
Engine model: | Lycoming IO-320-E2A |
Fatalities: | Fatalities: 0 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Alexander City, AL -
United States of America
|
Phase: | Landing |
Nature: | Private |
Departure airport: | Alexander City, AL (KALX) |
Destination airport: | , (KALX) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot stated that he was conducting a personal flight with the owner of the airplane. The owner did not have any flight time in make and model. The airplane had a pre-buy inspection conducted two days before the accident and no anomalies were noted. The pilot conducted a preflight inspection before the flight and no anomalies were noted. The pilot and the owner departed on runway 36 and remained in a left closed traffic pattern. The pilot made a three-point landing in the first 1,000 feet of the runway, and was on the landing roll out, when the tailwheel started to shimmy. He applied forward pressure on the control stick and raised the tailwheel off the runway. The shimmy ceased and the pilot applied aft pressure on the control stick and lowered the tail wheel onto the runway. The airplane immediately veered to the right. The pilot applied left brake and rudder, but the airplane continued to the right off the right side of the runway and collided with a ditch. The right main landing gear separated and the right wing received structural damage. Examination of the airplane revealed the right spring on the tailwheel control had separated from the rudder and the tailwheel attachment. The tailwheel spring was located about 20 feet off the right side of the runway and there was no visible damage to the tailwheel spring or the upper and lower attachments points. The previous owner stated that he informed the new owner of the tendency for the tailwheel to shimmy during the three-point landings.
Probable Cause: The separation of the right tail wheel spring on landing roll out for undetermined reasons, resulting in a loss of directional control and collision with a ditch.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | MIA08CA095 |
Status: | Investigation completed |
Duration: | 1 month |
Download report: | Final report |
|
Sources:
NTSB
History of this aircraft
Other occurrences involving this aircraft
22 August 2018 |
N1682G |
Three Point Partners Inc |
2 |
near three sisters Falls, Descanso,CA |
|
sub |
Loss of control |
Location
Revision history:
Date/time | Contributor | Updates |
20-May-2008 13:14 |
Fusko |
Added |
21-Dec-2016 19:14 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
21-Dec-2016 19:16 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
21-Dec-2016 19:20 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
22-Nov-2017 10:44 |
ASN Update Bot |
Updated [Operator, Other fatalities, Departure airport, Destination airport, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation