ASN Wikibase Occurrence # 208784
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 1 July 2016 |
Time: | 16:10 |
Type: | Avro RJ85 |
Owner/operator: | CityJet |
Registration: | EI-RJW |
MSN: | E2371 |
Fatalities: | Fatalities: 0 / Occupants: 93 |
Aircraft damage: | None |
Category: | Serious incident |
Location: | near Paris-Charles de Gaulle Airport (CDG/LFPG) -
France
|
Phase: | En route |
Nature: | Passenger - Scheduled |
Departure airport: | Paris-Charles de Gaulle Airport (CDG/LFPG) |
Destination airport: | Newcastle Airport (NCL/EGNT) |
Investigating agency: | AAIU |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:During climb out from Paris Charles de Gaulle Airport (LFPG), France, on a scheduled passenger flight to Newcastle (EGNT), United Kingdom, the flight crew noticed that the cabin rate of climb and cabin altitude had increased rapidly, and that a white PRESSN advisory light (pressurisation fault) had illuminated on the Central Warning Panel (CWP). This was followed by a pressurisation system caution light (pressurisation failure). As the flight crew were completing the abnormal operation checklist, a CABIN HI ALT (cabin high altitude) warning was generated. This resulted in the flight crew declaring an emergency (Mayday) to Air Traffic Control (ATC), donning their oxygen masks and performing an emergency descent.
During completion of the cabin high altitude checklist, they discovered that a ram air switch on the overhead panel, which controls the position of the ram air valve, was in the OPEN position instead of the normal SHUT position. The flight crew moved the switch to the SHUT
position, which closed the ram air valve and restored normal system operation. The flight was continued to EGNT without further incident.
It was subsequently found that a non-return valve in the aircraft’s ram air system had been installed the wrong way round. This incorrectly installed valve, in combination with the ram air valve being in the open position on the occurrence flight, prevented the aircraft from pressurising correctly
Probable Cause:
Failure of the aircraft to correctly pressurise after take-off due the inadvertent selection of the ram air switch to OPEN, combined with an incorrectly fitted ram air non-return valve.
Contributory Cause:
There are no design features that preclude an incorrect installation of the ram air non-return valve.
Accident investigation:
|
| |
Investigating agency: | AAIU |
Report number: | |
Status: | Investigation completed |
Duration: | 1 year and 9 months |
Download report: | Final report |
|
Sources:
http://www.aaiu.ie/sites/default/files/report-attachments/REPORT%202018-005.pdf Revision history:
Date/time | Contributor | Updates |
04-Apr-2018 16:32 |
harro |
Added |
04-Apr-2018 16:57 |
harro |
Updated [Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation