ASN Wikibase Occurrence # 212867
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 2 July 2018 |
Time: | 11:30 |
Type: | Canadian Home Rotors Safari 400 |
Owner/operator: | Private |
Registration: | N326RW |
MSN: | 6686 |
Year of manufacture: | 2018 |
Total airframe hrs: | 24 hours |
Engine model: | Aero Sport Power O-360-C2A |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Aguilares, Webb County, TX -
United States of America
|
Phase: | En route |
Nature: | Private |
Departure airport: | Slator Ranch, TX |
Destination airport: | Slator Ranch, TX |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The private pilot departed in an amateur-built helicopter on a local flight for phase I flight test requirements. The helicopter was between 20 and 30 ft above ground level when it started to shudder. The pilot looked for a place to land and then heard a "pop"; the helicopter then lost tail rotor authority. The helicopter started to rotate counterclockwise, and the pilot attempted to stop the rotation without success. The helicopter impacted the ground and rolled onto its left side, which resulted in substantial damage.
Postaccident examination of the transmission revealed that the tail rotor pinion had failed. There was no damage to the tail rotor blades or the tail rotor driveshaft. Laboratory examination of the tail rotor pinion revealed that both halves of the pinion shaft fracture surface exhibited mechanical damage by recontact resulting in rubbing of the fracture surfaces. No evidence of a preexisting crack was observed. Microhardness measurement values were consistent with the specifications for the pinion shaft. There were no other mechanical anomalies with the helicopter or its systems that would have precluded normal operations.
The lack of damage to the tail rotor blades and tail rotor driveshaft is consistent with the failure of the tail rotor pinion in flight and not as a result of ground impact. Due to the recontact rubbing of the fracture surface, the investigation was not able to determine the exact reason for the pinion failure.
Probable Cause: The loss of tail rotor control due to the in-flight failure of the tail rotor pinion.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN18LA247 |
Status: | Investigation completed |
Duration: | 1 year and 9 months |
Download report: | Final report |
|
Sources:
NTSB
Location
Revision history:
Date/time | Contributor | Updates |
04-Jul-2018 13:20 |
Captain Adam |
Added |
04-Jul-2018 13:21 |
harro |
Updated [Aircraft type] |
04-Jul-2018 13:21 |
harro |
Updated [Phase] |
19-Apr-2020 17:25 |
ASN Update Bot |
Updated [Time, Operator, Nature, Departure airport, Destination airport, Source, Narrative, Accident report, ] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation