Accident de Havilland Canada DHC-2 MK.1 Beaver N68083,
ASN logo
ASN Wikibase Occurrence # 227366
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Friday 19 July 2019
Time:10:10 LT
Type:Silhouette image of generic DHC2 model; specific model in this crash may look slightly different    
de Havilland Canada DHC-2 MK.1 Beaver
Owner/operator:Rust Properties LLC
Registration: N68083
MSN: 1254
Year of manufacture:1958
Total airframe hrs:29448 hours
Engine model:Pratt & Whitney R-985-14B
Fatalities:Fatalities: 1 / Occupants: 7
Aircraft damage: Substantial
Category:Accident
Location:Tutka Bay near Homer, AK -   United States of America
Phase: Take off
Nature:Passenger - Non-Scheduled/charter/Air Taxi
Departure airport:Seldovia, AK
Destination airport:Anchorage-Lake Hood, AK (LHD/PALH)
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The pilot stated that, during takeoff in the float-equipped airplane, he saw the left float begin to move into his peripheral vision from the left cockpit window and the airplane began to yaw to the left. The left wing subsequently impacted the water and the airplane nosed over, separating the right wing from the fuselage. The passengers consistently reported choppy water conditions at the time of the accident; one passenger reported that white caps were visible on the ocean waves in the distance. The passengers said that, during the takeoff, the airplane impacted a swell or wave and nosed over abruptly, and the cabin rapidly filled with water.
Examination of the float assembly revealed fractures in the left front flying wire attachment fitting and the right rear flying wire attachment strap and hole elongation in the left rear flying wire attachment fitting. Additionally, the bolts attaching the two left flying wire attachment fittings to the left float were bent, and the two flying wires that had been attached to the fractured attachment fitting and attachment strap were buckled. While some areas of corrosion were observed on the fractured left forward fitting, the total area of corrosion was a small percentage of the total cross-section, and the remainder of the fracture and associated deformation of the lug was consistent with ductile overstress fracture. Similar areas of corrosion were also observed on each of the intact flying wire attachment fittings.
Post-accident testing completed by the float manufacturer revealed that buckling of flying wires similar to that observed on the accident airplane was only reproduced at strap and fitting failure loads above 9,000 pounds force; the design specification load was 3,453 pounds of force. This indicates that the small amount of corrosion present on the fractured flying wire attachment fitting did not reduce its load-carrying capability below the design specification load of 3,453 pounds of force, and that both the flying wire attachment fitting and flying wire attachment strap fractured due to overload. Therefore, it is likely that the accident airplane floats were subject to forces that exceeded their design limitations, resulting in overload of the flying wires attached to the left float. It is also likely that, given the lack of damage on either float, the force was due to impact with an ocean wave or swell and not by striking an object.
 

Probable Cause: The airplane's floats impact with an ocean wave or swell, which exceeded the design load specifications of the flying wire assemblies and resulted in a partial separation of the float assemblies.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: ANC19FA035
Status: Investigation completed
Duration:
Download report: Final report

Sources:

FAA register: https://registry.faa.gov/aircraftinquiry/Name_Results.aspx?Nametxt=RUST&sort_option=1&PageNo=1

NTSB ANC19FA035

Location

Images:


N68083 at Lake Hood, August 2000; (c) H.Ranter/ASN

Media:

Revision history:

Date/timeContributorUpdates
19-Jul-2019 20:26 Captain Adam Added
19-Jul-2019 21:51 Captain Adam Updated [Total fatalities, Narrative]
19-Jul-2019 22:43 Geno Updated [Time, Aircraft type, Operator, Nature, Source]
20-Jul-2019 04:01 Iceman 29 Updated [Source, Embed code, Damage, Narrative]
20-Jul-2019 04:02 Iceman 29 Updated [Source, Embed code]
20-Jul-2019 04:05 Iceman 29 Updated [Narrative]
20-Jul-2019 04:22 Iceman 29 Updated [Aircraft type]
20-Jul-2019 05:03 Iceman 29 Updated [Narrative]
20-Jul-2019 05:04 Iceman 29 Updated [Source]
20-Jul-2019 05:37 Captain Adam Updated [Aircraft type]
20-Jul-2019 05:38 Anon. Updated [Location]
20-Jul-2019 17:05 harro Updated [Aircraft type, Departure airport, Source]
22-Jul-2019 17:05 harro Updated [Registration, Cn, Source, Photo]
22-Jul-2019 19:00 Captain Adam Updated [Narrative]
27-Mar-2021 10:45 ASN Update Bot Updated [Time, Other fatalities, Nature, Departure airport, Destination airport, Source, Narrative, Category, Accident report]
27-Mar-2021 11:00 harro Updated [Nature, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org