ASN Wikibase Occurrence # 230745
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Saturday 9 November 2019 |
| Time: | |
| Type: |  The Airplane Factory Sling 2 |
| Owner/operator: | |
| Registration: | |
| MSN: | |
| Fatalities: | Fatalities: 0 / Occupants: |
| Aircraft damage: | Substantial |
| Location: | Caboolture Airport (YCAB), Caboolture, QLD -
 Australia
|
| Phase: | Landing |
| Nature: | Unknown |
| Departure airport: | |
| Caboolture Airport (YCAB) | |
| Confidence Rating: |  Information verified through data from accident investigation authorities |
The aircraft experienced a loss of control in the landing flare which resulted in the aircraft bouncing. The pilot elected to conduct a missed approach. On the subsequent approach, a successful flare and landing was conducted, however the nose wheel of the aircraft collapsed during roll out, resulting in additional damage. A post accident investigation could not determine any pre-existing defect in the nose leg and the failure was most likely due to over stress during the initial landing attempt.
Sources:
https://www.raa.asn.au/safety/accident-and-defect-summaries/
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 18-Nov-2019 07:37 | Pineapple | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation