ASN logo
ASN Wikibase Occurrence # 23184
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Time:20:50 UTC
Type:Silhouette image of generic B412 model; specific model in this crash may look slightly different    
Bell CH-146 Griffon (412CF)
Owner/operator:Canadian Armed Forces (CAF)
Registration: 146420
MSN: 46420
Fatalities:Fatalities: 2 / Occupants: 4
Other fatalities:0
Aircraft damage: Written off (damaged beyond repair)
Location:100nm N of Goose Bay (CYYR), NFL -   Canada
Phase: En route
Departure airport:Goose Bay
Destination airport:
Confidence Rating: Information is only available from news, social media or unofficial sources
The crew was conducting a Search and Rescue (SAR) mission about 100 nautical miles from Goose Bay when Rescue Coordination Centre Halifax cancelled the mission because the target had been located. The weather was marginal visual flight rules. The crew started the return leg to 5 Wing, when, in normal cruise flight at 200-300 feet above ground level, the tail rotor departed the aircraft. About 400 meters down track, the aircraft crashed into hilly, tree-covered terrain. Both pilots were killed instantly and both the SAR Technician and Flight Engineer were seriously injured. Despite his injuries, the Flight Engineer was able to render first aid to his crewmates. He used a satellite phone to report the accident to RCC Halifax. A 444 Squadron rescue helicopter arrived on scene to evacuate the survivors to medical facilities within 3 hours. The aircraft was destroyed.

The investigation revealed that while in cruise flight, the tail rotor of CH146420 failed due to a fatigue crack initiating from a small damage site on the skin of the rotor blade about 18.5 inches from the tip of one blade. That section of one blade then flew off; the resulting imbalance of this dynamic component caused the tail rotor input shaft to fail instantly and the entire tail rotor to depart the aircraft. The change to the aircraft's centre of gravity with loss of mass of the tail rotor created a nearly instantaneous and extreme out of normal flight condition which was compounded by the low altitude, terrain, and weather conditions.

Contributing factors included tail rotor inspection (frequency and criteria), and aircrew autorotation training.

A total of 39 safety recommendations resulted from this accident. These recommendations are aimed at DND, Transport Canada, the United States Federal Aviation Administration, and Bell Helicopter.


Revision history:

27-Sep-2008 01:00 ASN archive Added
11-Apr-2009 23:29 Anon. Updated
11-Apr-2009 23:36 harro Updated
25-Aug-2011 06:05 Uli Elch Updated [Operator, Location, Narrative]
06-Feb-2013 08:03 TB Updated [Cn, Location, Narrative]
06-Feb-2013 08:15 TB Updated [Location]
01-Sep-2014 13:27 Aerossurance Updated [Location, Departure airport, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2022 Flight Safety Foundation

701 N. Fairfax St., Ste. 250
Alexandria, Virginia 22314