ASN Wikibase Occurrence # 268168
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Tuesday 28 September 2021 |
Time: | 16:08 LT |
Type: | Cessna T210N Turbo Centurion |
Owner/operator: | Private |
Registration: | N1925U |
MSN: | 21064750 |
Year of manufacture: | 1982 |
Total airframe hrs: | 6395 hours |
Engine model: | Continental TSIO-520-R |
Fatalities: | Fatalities: 0 / Occupants: 1 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Pike Township, Stark County, OH -
United States of America
|
Phase: | En route |
Nature: | Private |
Departure airport: | Wadsworth, OH (3G3) |
Destination airport: | Wadsworth, OH (3G3) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The pilot reported that during cruise flight the engine began to run rough with a sudden decrease in engine manifold pressure and exhaust gas temperature for cylinder Nos. 2 and 4. The engine continued to run erratically for another 100 seconds before it lost total power. The pilot made a forced landing on hilly terrain, during which the nose gear collapsed. The airplane's engine mount and lower fuselage structure were substantially damaged.
Postaccident examination determined that the No. 2 cylinder exhaust valve fractured near the stem-to-fillet transition. The fracture surface exhibited features consistent with a fatigue failure. Additionally, the clearance from the exhaust valve stem to the valve guide exceeded the manufacturer's service limit.
The No. 2 cylinder exhaust valve failed in fatigue likely due to the wear of the valve guide and rocker arm bearing systems. The wear of the guide allowed the exhaust valve to move so that it could no longer consistently contact the valve seat. The asymmetric load induced a bending moment on the exhaust valve stem that eventually resulted in the initiation of a fatigue crack along the stem edge. The wear of the rocker arm shaft and rocker arm bearing likely contributed to the exhaust valve failure by tilting the rocker arm and changing the angle at which it engaged the tip of the exhaust valve stem.
Probable Cause: A total loss of engine power due to a fatigue failure of the No. 2 cylinder exhaust valve.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | CEN21LA472 |
Status: | Investigation completed |
Duration: | 1 year and 11 months |
Download report: | Final report |
|
Sources:
NTSB CEN21LA472
https://flightaware.com/live/flight/N1925U FAA register:
https://registry.faa.gov/aircraftinquiry/Search/NNumberResult?NNumberTxt=1925U Location
Revision history:
Date/time | Contributor | Updates |
29-Sep-2021 01:47 |
Captain Adam |
Added |
29-Sep-2021 02:49 |
RobertMB |
Updated [Time, Aircraft type, Registration, Cn, Departure airport, Destination airport, Source, Narrative] |
21-Sep-2023 11:48 |
ASN Update Bot |
Updated [[Time, Aircraft type, Registration, Cn, Departure airport, Destination airport, Source, Narrative]] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation