ASN Wikibase Occurrence # 287580
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Saturday 14 July 2012 |
| Time: | 22:20 LT |
| Type: |  Piper PA-44-180 Seminole |
| Owner/operator: | University Of North Dakota |
| Registration: | N580ND |
| MSN: | 4496257 |
| Year of manufacture: | 2008 |
| Total airframe hrs: | 2950 hours |
| Engine model: | Lycoming LO-360-A1H6 |
| Fatalities: | Fatalities: 0 / Occupants: 2 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Grand Forks, North Dakota -
 United States of America
|
| Phase: | Landing |
| Nature: | Training |
| Departure airport: | Grand Forks Airport, ND (GFK/KGFK) |
| Grand Forks Airport, ND (GFK/KGFK) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot receiving instruction reported that during the downwind leg, after the flight instructor had simulated a single-engine failure of the twin-engine airplane, he began to fall behind on completing required checklist items, and, as result, he inadvertently forgot to extend the landing gear. He recalled hearing the landing gear warning horn while on the crosswind leg but reportedly was too distracted with flying the airplane to extend the landing gear at that point. He reported seeing sparks and hearing a grinding noise upon touchdown, at which time he also recalled hearing the landing gear warning horn. The flight instructor recalled that the airplane tail impacted the runway shortly after the pilot receiving instruction reduced engine power during the landing flare. The flight instructor noted that he heard the landing gear warning horn shortly after the airplane made contact with the runway. The airplane slid 200 to 300 feet on the lower fuselage before coming to a stop. A postaccident examination revealed that the landing gear selector handle was in the "UP" position. The landing gear extended normally into a down-and-locked position after the airplane was lifted off the ground and the landing gear selector handle was placed into the "DOWN" position. The operator reported that there were no mechanical anomalies that would have prevented the landing gear from extending normally.
Probable Cause: The pilot receiving instruction's failure to extend the landing gear and the flight instructor's failure to adequately monitor his student's actions during the approach.
Accident investigation:
 |
|
Sources:
NTSB CEN12LA444
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 04-Oct-2022 12:18 | ASN Update Bot | Added |
| 17-Nov-2022 19:46 | Ron Averes | Updated [Aircraft type, Narrative] |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation