Accident Cessna U206F N8737Q,
ASN logo
ASN Wikibase Occurrence # 288970
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Friday 12 August 2011
Time:13:40 LT
Type:Silhouette image of generic C206 model; specific model in this crash may look slightly different    
Cessna U206F
Owner/operator:Key West Seaplanes
Registration: N8737Q
MSN: U20603490
Year of manufacture:1976
Total airframe hrs:2420 hours
Engine model:Continental IO 520 SERIES
Fatalities:Fatalities: 0 / Occupants: 5
Aircraft damage: Substantial
Category:Accident
Location:Arcadia, Florida -   United States of America
Phase: Standing
Nature:Unknown
Departure airport:Arcadia, FL
Destination airport:Arcadia, FL
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
The pilot stated that during the water takeoff, he used 10 degrees of flaps to get the airplane on "plane." Once the airplane began to climb, he added another 10 degrees of flaps to climb. The airplane climbed to about 400 feet but would not maintain altitude. There was no loss in engine power, and the airplane began to descend. The pilot executed a forced landing into a field, and the airplane collided with trees. After recovery of the airplane, the engine was removed and test run. No preaccident mechanical malfunctions or failures were found that would have precluded normal engine operation.

A review of the performance chart revealed that the airplane, in a clean configuration and at a maximum gross weight of 3,800 pounds, should have been able to maintain a rate of climb of 600 feet per minute at about 65 knots. The density altitude at the time of the accident was about 2,300 feet. Although the pilot estimated the gross weight was 3,695 pounds, postaccident weight and balance calculations revealed the estimated weight of the airplane at takeoff was 3,855 pounds, which was 55 pounds above the maximum allowable gross weight. High density altitude and increased gross weight both adversely affect an airplane's climb performance. The presence of either or both conditions requires pilot vigilance to maintain adequate airspeed during takeoff and climb. Aircraft performance can become marginal in high density altitude conditions, and it may be necessary to reduce aircraft gross weight for safe operations. It is likely that the high density altitude combined with operation over the airplane's maximum permitted takeoff gross weight resulted in the airplane's inability to climb or maintain altitude. These factors would both reduce the performance of the airplane.

Probable Cause: The pilot's decision to take off in high density altitude conditions with the airplane over its maximum gross weight, due to the pilot's improper weight and balance calculations, which resulted in the airplane's inability to climb or maintain altitude.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: ERA11LA451
Status: Investigation completed
Duration: 1 year and 4 months
Download report: Final report

Sources:

NTSB ERA11LA451

Location

Revision history:

Date/timeContributorUpdates
05-Oct-2022 08:19 ASN Update Bot Added

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org