ASN Wikibase Occurrence # 294480
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Saturday 18 September 2004 |
| Time: | 16:00 LT |
| Type: |  RAF 2000 |
| Owner/operator: | Eagle Flight, Inc |
| Registration: | N702BX |
| MSN: | H2 97-8-322 |
| Engine model: | Subaru EJ 2.2 Liter |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Pontiac, Michigan -
 United States of America
|
| Phase: | Unknown |
| Nature: | Private |
| Departure airport: | Pontiac-Oakland County International Airport, MI (PTK/KPTK) |
| New Haven, MI (57D) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The amateur-built gyrocopter sustained substantial damage during a forced landing after takeoff. Prior to takeoff, the pilot had performed a 30-40 minute ground run to check the engine cooling system that had been modified prior to the flight. The pilot reported that the engine operating temperature during the ground run was 140 degrees F and there were no coolant leaks. The pilot reported that during the takeoff, the gyrocopter's climb performance was not as good as he had anticipated. By the end of runway, the gyrocopter had climbed to about 200 feet above ground level (agl), and the engine started to lose power. The pilot declared an emergency and attempted to return to the runway. The pilot reported that the gyrocopter "did not have enough altitude or speed to make a proper landing." The pilot landed the gyrocopter in a grassy area at the end of the runway. A visual inspection of the cylinders with a borescope revealed that both aft cylinders exhibited evidence of scoring and overheating. The gyrocopter pilot/owner had altered the engine cooling system by moving the radiator approximately four inches aft of its original location, because the engine operating temperature was higher than normal (190-200 degrees F). By moving the radiator aft, it moved the radiator further away from the engine exhaust system, and it provided for increased cooling system fluid capacity by lengthening the radiator hoses. The pilot/owner was unable to return all the coolant that he had drained from the radiator prior to the modification, back into the radiator after the modification was made. The cooling system modification was made at the advice of the airframe kit manufacturer, however, the pilot/owner was not a mechanic and he did not have the required cooling system service instructions available at the time the modification was made.
Probable Cause: The partial loss of engine power due to the scoring and overheating of the cylinders as a result of the pilot/owner's improper servicing of the modified engine cooling system. Additional factors included the pilot/owner modifying and servicing the engine cooling system without maintenance instructions available for reference.
Accident investigation:
 |
|
Sources:
NTSB CHI04CA261
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 11-Oct-2022 18:41 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation