ASN Wikibase Occurrence # 297176
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Sunday 9 June 2002 |
| Time: | 08:25 LT |
| Type: | Nieuport 11 |
| Owner/operator: | Private |
| Registration: | N132DC |
| MSN: | 008 |
| Total airframe hrs: | 0 hours |
| Engine model: | Volkswagen 1835 |
| Fatalities: | Fatalities: 0 / Occupants: 1 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | Independence, Oregon -
 United States of America
|
| Phase: | Unknown |
| Nature: | Private |
| Departure airport: | Independence, OR (7S5) |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
About 20 minutes into the experimental aircraft's first flight after the completion of its construction, the Volkswagen 1835 engine slowly began to lose power. Immediately after the pilot discovered he had a problem with the engine, he turned toward the approach end of the field he had departed from in hopes of making a precautionary landing if necessary. As he headed back toward the airport, the aircraft continued to lose power, and it became apparent that he would not be able to stretch the glide far enough to land on the paved runway. Because the terrain between him and the runway was not suitable for landing and was crossed by power lines, and because the berm that ran along the side of the runway made it unsafe to land perpendicular to the runway, the pilot decided he would try to land parallel to the runway in a mowed grass area adjacent to it. Although he was able to stretch the glide to an extent that allowed him to reach the airport boundary, the aircraft had lost so much altitude that when he attempted to make the turn to parallel the runway, the aircraft's right wing tip impacted the terrain. A post-accident inspection of the engine determined that the distributor position locking clamp bolt had not been retightened after a pre-installation engine test run. The lose distributor then slowly rotated while the aircraft was airborne, resulting in a slow but steady loss of power.
Probable Cause: The partial loss of engine power in maneuvering flight due to the rotation of the ignition distributor as a result of a failure to tighten the distributor positioning clamp after the last engine timing adjustment. Factors include an inadequate maintenance activity, no suitable landing terrain below the location where the loss of power occurred, and power lines along the emergency descent flight path.
Accident investigation:
 |
|
Sources:
NTSB SEA02FA097
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 14-Oct-2022 15:21 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation