ASN Wikibase Occurrence # 297537
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Tuesday 5 March 2002 |
| Time: | 18:55 LT |
| Type: |  Velocity 173RG |
| Owner/operator: | private |
| Registration: | N278GJ |
| MSN: | DMO 275 |
| Total airframe hrs: | 255 hours |
| Engine model: | Lycoming LIO-360-C1E6 |
| Fatalities: | Fatalities: 0 / Occupants: 2 |
| Aircraft damage: | Substantial |
| Category: | Accident |
| Location: | West Jordan, Utah -
 United States of America
|
| Phase: | Unknown |
| Nature: | Private |
| Departure airport: | Wendover Airport, UT (ENV/KENV) |
| West Jordan, UT (U42) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
The pilot reported that he was attempting a landing after dark on runway 16 at the non-towered airport. The accident pilot reported that as he was turning base for runway 16, another aircraft (registration number not reported or determined), which he had passed on the way into Salt Lake #2 Airport, announced that he was entering downwind for runway 34. The pilot reported that he attempted to talk to the pilot of the other aircraft on the radio, but got no response. The pilot stated that he put the gear switch down, but forgot to check for three green lights since his attention was diverted to the other aircraft. The pilot stated that he saw the other aircraft turning final as he (the accident pilot) was about to flare. The pilot reported that he then attempted to initiate a go-around, but the aircraft's propeller struck the runway and the engine stopped. The aircraft touched down on the sod on the side of the runway and subsequently struck an object on the ground and slid partially back onto the runway. The pilot stated that the other aircraft subsequently landed on runway 34 and went past the accident aircraft. An FAA inspector who was at the airport at the time reported that the landing gear handle was in the "down" position at the accident scene, but that the gear appeared to have never come out of the wells. The pilot of the other aircraft was not identified to the NTSB, and was not contacted. The pilot reported that a hydraulic down pressure switch had failed, disabling normal landing gear extension.
Probable Cause: The pilot's failure to ensure that the gear was extended prior to landing. Factors included a failure of a hydraulic down-pressure switch, and the pilot's attention diverted to another aircraft executing an opposite-direction traffic pattern.
Accident investigation:
 |
|
Sources:
NTSB SEA02LA050
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 14-Oct-2022 19:49 | ASN Update Bot | Added |
| 01-Aug-2023 21:21 | harro | Updated |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation