ASN Wikibase Occurrence # 314556
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can submit corrected information.
| Date: | Monday 13 December 2010 |
| Time: | 07:57 LT |
| Type: |  Cessna 560XL Citation Excel |
| Owner/operator: | Executive Jet Management Inc |
| Registration: | N498AB |
| MSN: | 560-5116 |
| Year of manufacture: | 2000 |
| Total airframe hrs: | 4994 hours |
| Engine model: | P&W Canada PW545A |
| Fatalities: | Fatalities: 0 / Occupants: 3 |
| Aircraft damage: | None |
| Category: | Serious incident |
| Location: | Birmingham, Alabama -
 United States of America
|
| Phase: | Landing |
| Nature: | Unknown |
| Departure airport: | Teterboro Airport, NJ (TEB/KTEB) |
| Birmingham-Shuttlesworth International Airport, AL (BHM/KBHM) | |
| Investigating agency: | NTSB |
| Confidence Rating: |  Accident investigation report completed and information captured |
During approach and landing, the pilots noted that the airplane had stiff rudder operation. A postflight examination of the airplane found ice in its tailcone stinger, through which the rudder and elevator control cables run. Further investigation discovered that other Cessna 560XL airplanes had encountered the same problem. The design of the airplane was such that water could enter the tailcone, collect there, and freeze around the rudder cables during operations in subfreezing temperatures. The manufacturer had issued a service letter (SL) in 2005 to add a drain hole in the tailcone stinger for in-service airplanes and added a drain hole to production airplanes; this incident airplane had a drain hole in its tailcone that was consistent with the SL. Therefore, the drain hole specified in the SL was not sufficient to correct the problem. In addition, the investigation discovered that some production airplanes had drain holes that were smaller than the size specified in the SL. The manufacturer subsequently issued an alert service letter (ASL) in January 2011 to inspect the existing drain holes to ensure they were the right size, seal an existing drain hole, and add another drain hole in the aft canted bulkhead; however, in March 2011, an airplane modified in accordance with the ASL experienced stuck rudder controls; ice and water were found in its tailcone stinger. The manufacturer subsequently issued a mandatory service bulletin (SB) in October 2011 that specified additional modifications intended to reduce the amount of moisture that can enter the tailcone stinger and to improve the drainage. The Federal Aviation Administration (FAA) district office that oversees the production certification of the Cessna 560XL and the manufacturer's issuance of associated SLs and SBs did not detect the improper-sized holes on some production airplanes. The manufacturer subsequently implemented a specific inspection to verify the drain hole installation on production airplanes, and the FAA has followed up.
Probable Cause: The manufacturer's inadequate initial design and inadequate subsequent modifications of the tailcone, which allowed moisture to collect and freeze around rudder cables during operations in subfreezing temperatures, resulting in a loss of rudder authority during landing.
Accident investigation:
 |
|
Sources:
NTSB CEN11IA111
History of this aircraft
Other occurrences involving this aircraft
| 4 September 2021 | N827JS | Fly Exclusive | 0 | near Salt Lake City International Airport, UT (SLC) | |
sub |
Location
Revision history:
| Date/time | Contributor | Updates |
|---|---|---|
| 02-Jun-2023 18:36 | ASN Update Bot | Added |
Corrections or additions? ... Edit this accident description
The Aviation Safety Network is an exclusive service provided by:
Quick Links:
| ASN Home | Send Correction / Feedback |
| FSF Home | Disclaimer | Copyright |
| Contact Us | Privacy Policy |
| Press / Media |
CONNECT WITH US:
©2024 Flight Safety Foundation