ASN logo
ASN Wikibase Occurrence # 36475
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Type:Silhouette image of generic BE95 model; specific model in this crash may look slightly different    
Beechcraft 95-B55 Baron
Registration: N3MT
MSN: TC-625
Fatalities:Fatalities: 1 / Occupants: 1
Other fatalities:0
Aircraft damage: Written off (damaged beyond repair)
Location:Mexia, TX -   United States of America
Phase: Manoeuvring (airshow, firefighting, ag.ops.)
Departure airport:Austin, TX (BSM)
Destination airport:
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
The private pilot radioed to the fixed base operator (FBO) stating that he didn't have a green landing gear light; however, the mechanical indicator was showing the nose gear in the extended position. The pilot elected to fly the twin-engine airplane over the runway, past the FBO, so that two pilot-rated witnesses could check the landing gear. The witnesses stated that the airplane flew by at a 'very slow airspeed,' and the landing gear appeared to be in the extended position. The witnesses added that they observed the airplane initiate a climb and gradual turn to the left. They stated that they heard a 'small amount of power being added to the engines, but not full power.' Both witnesses stated that the 'engines sounded good and the airplane appeared to be under control.' Other witnesses, located south of the accident site, stated that they observed the airplane climbing and then turning to the left. The airplane was described as making a steep turn to the left followed by it spinning to the ground. The airplane had vortex generators, which lower the airplane's stall speed, installed 9 days prior to the accident. The pilot's flight instructor stated that the pilot 'had not practiced stalls recently,' and had not practiced stalls in the airplane since the vortex generators were installed. He added that the pilot never practiced full stalls in the airplane. No pre-accident anomalies were noted during examination of the airplane and engines. The landing gear actuator was found in the extended position.
Probable Cause: The pilot's failure to maintain airspeed while maneuvering in the traffic pattern, which resulted in a stall/spin. Factors were the partial failure of the landing gear indication system and the pilot's diverted attention.



Revision history:

24-Oct-2008 10:30 ASN archive Added
21-Dec-2016 19:23 ASN Update Bot Updated [Time, Damage, Category, Investigating agency]
12-Dec-2017 18:17 ASN Update Bot Updated [Operator, Destination airport, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2022 Flight Safety Foundation

701 N. Fairfax St., Ste. 250
Alexandria, Virginia 22314