ASN logo
ASN Wikibase Occurrence # 42405
Last updated: 26 November 2021
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Type:Silhouette image of generic G115 model; specific model in this crash may look slightly different
Grob G115D
Owner/operator:Sunquest Aviation
Registration: N234VW
MSN: 820101D
Fatalities:Fatalities: 2 / Occupants: 2
Other fatalities:0
Aircraft damage: Written off (damaged beyond repair)
Location:Indiantown, FL -   United States of America
Phase: Manoeuvring (airshow, firefighting, ag.ops.)
Departure airport:West Palm Beach, FL (F45)
Destination airport:
Investigating agency: NTSB
The flight was scheduled as an aerobatic flight, but no witnesses actually saw the airplane maneuvering. Hunters reported hearing the engine 'revving up' and saw pieces of the airplane falling to the ground. Wreckage was scattered over an area about 2400' long by 400' wide. Separated pieces of the airplane included: an 8' section of the left wing, pieces of the left and right elevators, and other debris from the empennage & canopy. The top portion of the rudder assembly was found about 2400' from the main wreckage. The left aileron was found intact, and it weighed 7.15 pounds; balance checks of the left aileron showed that its residual hinge moment was between +0.138 and +0.200 foot-pounds (trailing edge heavy), exceeding the Grob specification which ranges from -0.22 (leading edge heavy) to +0.074 foot-pounds (trailing edge heavy). A review of the aircraft maintenance logs revealed the airplane had been repainted, but the flight control surfaces had not been rebalanced. Manufacturing records showed that when the left aileron was originally installed, it weighed 6.40 pounds and had a residual hinge moment of +0.071 pounds. Estimates of the residual hinge moments of the other flight control surfaces, including the rudder, disclosed that they also exceeded Grob's trailing-edge-heavy service limits. Grob's flutter analysis, based on control connection stiffness, indicated potential rudder flutter under these conditions. Oxide deposits found on several of the elevator hinge contact surfaces evidenced disbonding/delamination. CAUSE: failure of maintenance personnel to rebalance the flight controls after the airplane had been repainted, which resulted in rudder flutter and in-flight breakup of the airplane.



Revision history:

24-Oct-2008 10:30 ASN archive Added
21-Dec-2016 19:24 ASN Update Bot Updated [Time, Damage, Category, Investigating agency]

Corrections or additions? ... Edit this accident description