ASN Wikibase Occurrence # 44181
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Monday 13 March 2006 |
Time: | 09:43 |
Type: | Beechcraft A36 Bonanza |
Owner/operator: | Private |
Registration: | N16JR |
MSN: | E433 |
Total airframe hrs: | 3510 hours |
Engine model: | Teledyne Continental IO-520-BA |
Fatalities: | Fatalities: 2 / Occupants: 2 |
Aircraft damage: | Substantial |
Category: | Accident |
Location: | Santa Monica, CA -
United States of America
|
Phase: | Take off |
Nature: | Private |
Departure airport: | Santa Monica, CA (SMO) |
Destination airport: | San Diego, CA (SDM) |
Investigating agency: | NTSB |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The engine lost power during the takeoff-initial climb and the pilot ditched the airplane in the ocean. Examination showed that the number 2 connecting rod fractured from the crankshaft. Metallurgical examination of the connecting rod, and associated bolts, nuts, and bearings, showed that following the first nut and bolt separation, the overall separation was not instantaneous. After the first nut unthreaded from its respective bolt, subsequent increased loads on the opposite bolt then stripped the threads of the other nut that had partially unthreaded from its bolt. Furthermore, there was no evidence of cotter pin installation. In general, a properly torqued nut and connecting rod bolt will not loosen under normal operational conditions. The engine underwent a field overhaul 735.31 hours prior to the accident. At 233.59 hours prior to the accident, the cylinders were removed for a blow by condition during an annual inspection; however, the aviation maintenance technician who performed this work stated that he did not remove the connecting rods from the crankshaft. Review of the autopsy results and impact damage to the wreckage indicated that the occupants' use of shoulder harnesses would have significantly increased their chances of survival.
Probable Cause: The failure of an aviation maintenance technician to properly torque and cotter pin the number 2 connecting rod bolts at their attach point to the crankshaft, which resulted in the separation of the connecting rod in flight, and complete power loss.
Accident investigation:
|
| |
Investigating agency: | NTSB |
Report number: | LAX06FA129 |
Status: | Investigation completed |
Duration: | |
Download report: | Final report |
|
Sources:
NTSB:
https://www.ntsb.gov/_layouts/ntsb.aviation/brief.aspx?ev_id=20060317X00321&key=1 Location
Revision history:
Date/time | Contributor | Updates |
28-Oct-2008 00:45 |
ASN archive |
Added |
21-Dec-2016 19:24 |
ASN Update Bot |
Updated [Time, Damage, Category, Investigating agency] |
05-Dec-2017 09:05 |
ASN Update Bot |
Updated [Operator, Other fatalities, Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation