Accident Robinson R22 Beta N2560Q,
ASN logo
ASN Wikibase Occurrence # 59738
 
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information. If you feel this information is incomplete or incorrect, you can submit corrected information.

Date:Wednesday 29 April 2009
Time:13:52
Type:Silhouette image of generic R22 model; specific model in this crash may look slightly different    
Robinson R22 Beta
Owner/operator:Private
Registration: N2560Q
MSN: 0614
Year of manufacture:1986
Engine model:Lycoming O-320 SERIES
Fatalities:Fatalities: 0 / Occupants: 1
Aircraft damage: Substantial
Category:Accident
Location:Harlingen, TX -   United States of America
Phase: Landing
Nature:Private
Departure airport:Harlingen, TX
Destination airport:Harlingen, TX
Investigating agency: NTSB
Confidence Rating: Accident investigation report completed and information captured
Narrative:
After landing the helicopter, the pilot set the cyclic and collective friction locks and left the helicopter "running" while he and his passenger disembarked the helicopter. After being left unattended for about two minutes, the helicopter began to lift-off and subsequently impacted terrain resulting in substantial damage. The pilot reported that the friction locks were still found engaged after the helicopter impacted the terrain. Winds in the vicinity of the accident were from the southeast at 21 gusting to 30 knots. According to the manufacturer, the cyclic and collective frictions are designed to allow the pilot to remove their hands from the controls to perform the cockpit portion of the preflight and post flight operations. A "caution" in the manufacturer's pilot operating handbook states, "Never leave helicopter flight controls unattended while engine is running." In addition the pilot operating handbook has a safety notice issued November 1984, which states, "Never exit helicopter with engine running. Several accidents have occurred when pilot momentarily left their helicopters unattended with the engine running and rotors turning. The collective can creep up, increasing both pitch and throttle, allowing the helicopter to lift off or roll out of control."

Probable Cause: The pilot's decision to leave the helicopter unattended with the engine running in gusty wind conditions.

Accident investigation:
cover
  
Investigating agency: NTSB
Report number: CEN09CA271
Status: Investigation completed
Duration: 3 months
Download report: Final report

Sources:

NTSB
FAA register: 2. FAA: http://registry.faa.gov/aircraftinquiry/NNum_Results.aspx?NNumbertxt=2560Q

Location

Revision history:

Date/timeContributorUpdates
30-Apr-2009 21:28 slowkid Added
01-Oct-2016 19:08 Dr.John Smith Updated [Operator, Total occupants, Departure airport, Source, Narrative]
21-Dec-2016 19:25 ASN Update Bot Updated [Time, Damage, Category, Investigating agency]
01-Dec-2017 18:54 ASN Update Bot Updated [Operator, Total occupants, Other fatalities, Departure airport, Destination airport, Source, Narrative]
26-Feb-2022 00:06 Captain Adam Updated [Other fatalities, Location, Source, Narrative]

Corrections or additions? ... Edit this accident description

The Aviation Safety Network is an exclusive service provided by:
Quick Links:

CONNECT WITH US: FSF on social media FSF Facebook FSF Twitter FSF Youtube FSF LinkedIn FSF Instagram

©2024 Flight Safety Foundation

1920 Ballenger Av, 4th Fl.
Alexandria, Virginia 22314
www.FlightSafety.org